Electron Beam Energy/Electronic Flame

Beam Energy/Electronic Flametm    FRIPRO   Energy, LLC  

ONE OF THE MOST IMPORTANT INVENTIONS OF OUR PRESENT-DAY ENERGY FLAME POLLUTION FREE FUEL SEARCH AND PLANT GROWTH. A NEW ENERGY TECHNOLOGY THAT ONE SHOULD NOT OVERLOOK! (NON-OXIDIZE FLAME-FIRE-BEAM AND WATER/SOLID DISSOCIATION).

1. Our Atmospheric Electron Particle Beam (AEPB) and it's generated-Electronic Flame, burns polluted fuels obtained  from contaminated CO2 Atmospheric Air from the burning of Natural Gas, Oil, Coal & Water. The AEPB can also almost burn clean these fossil fuels. World Atmospheric air is at 400+ ppm of CO2 and rising at 2 ppm per year, This is a potential disaster for Earth.*                 Solar and Wind generator array compatible. 

2. Plant Plasma  Solution TM c (PPS) is a Plant's root cell Plasma Membrane activator.  All our growing plants shown in our videos, hyperlinks and photos on our various web pages, used no fertilizer or water, only PPS and rain when available!   The poor growth plants and a non-fertilized starter plants when planted in poor soil and treated daily/weekly at different levels of PPS, can grow well.

One can picture a high mountain stream or a Valley where the run off water can be loaded into a large or many plant plasma generators that run on wind or solar power (no inverters are required). Our Plant Plasma Solution generator runs on DC voltage (also AC Power)! There is little if any run off nitrates, the plant absorbs them. Think clearly what this means to farmers! Read on to find out!

             Press F5 Key for Latest. METRO TOLEDO OHIO USA* (*Maumee O, Kingsport Tn 

                       Contact Tanksher43@aol.com either or both tanksher43@gmail.com  by phone 1 419 765 1760


anksh翻译   對於語音和文字    переводить    TRADUCTOR  --مترجم                        Copy  voice and text in any language. Then click on Translate paste in left box then copy from the new translation and paste it where ever you wish to use English and another language at the same time,  in--say e mail or other printed copy.

                        Do the same with any text on this web sites' Manuscript


Our Mission Statement:

1. Who are we:    Fripro energy, LLC of Metro Toledo Ohio and Kingsport Tn. USA, brings into being innovations for new non-nuclear green (Clean) energy sources-burning atmospheric air, CO2, other fossil fuels and electricity near (pollution free) as a synergistic fuel (in our operating Atmospheric Electron Particle Beam, (AEPB) Electronic Flame GENERATOR) . 

Other molecules exist in the Earth's Atmospheric air, and when disassociated by our AEPB nozzles contribute to the Electronic Flames' fuel on ceramic targets. (Bricks etc.)

Clean fuel energy from coal, oil, natural gas, water and the Atmosphere etc. burned pollution free in the AEPB is possible!

Adding fossil fuels like gas, coal, oil, CO2  promotes cleaner burning fuels with synergistic results!  In special cases CO2 taken from burning fuels of the atmosphere can also act as a fuel by dissociation of molecules with very high energy transmitted to the target ceramic.       

2. What do we do:  Work to put into service our very important agriculture (Plant Plasma Solution) and cleaner non-nuclear radiation clean energy technology. Our videos are displayed in real (non-edited) lab testing time.

3. Why should the Energy Department, Industry, Investors, Angles and Universities have an interest in our inventions?   It is because of our break-through innovations reversing the Cave Man's wood burning smoke, who taught future generations how to pollute the atmosphere.  

Fripro Energy, LLC is interested working with Angel Investors or corporations who love this type of technology to help!   Why? Because they have the where with all and love to help clean up the Earths atmosphere, having  cleaner electric power generation.  Through burning fossil fuels pollution free through our AEPB technology.  

      Quote: J.P. Morgan, investment in Edison's Electric Light  "A chance to control a new industry from the START"! 

4. Why are we different: Stay on this page for real video and sound recordings of our valuable Mass to Radiation Electron Particle Beam/Electronic Flametm c in the Manuscripts 1 & 2.


 Manuscripts: 

1. ATMOSPHERE ELECTRON PARTICLE BEAM (AEPB), ELECTRONIC FLAMETM c  Atmospheric air* directed through our nozzles, at a Fire Brick (ceramic) converts our AIR fuel to the Fifth State of non nuclear energy, via our low frequency radiation Electron Particle Beam and its generated Electronic Flame.       

    To:  FRIPRO'S AEPB TABLE OF CONTENTS   Or continue down for Video

2. PLANT PLASMA GENERATION Growth SOLUTION click 

Plant Plasma Solution enhancer, opens the root's Plasma Membranes to accept from the soil water, fertilizer, and the PPS that is added. Nearly dead or dying plants, trees etc can be revived to grow into great plants! An also Plants help clean our atmosphere.  

TWO OF THE MOST IMPORTANT INVENTIONS OF OUR PRESENT-DAY CLEAN ENERGY SEARCH. IMPORTANT PROOF AND DESCRIPTIONS OF THE ATMOSPHERIC ELECTRON PARTICLE BEAM (AEPBc tm ) AND ITS GENERATED ATMOSPHERIC ELECTRONIC FLAMEc tm

A NEW ENERGY TECHNOLOGY THAT ONE SHOULD NOT OVERLOOK! The fact that an atmospheric electron beam can exist (not a plasma beam) without a transparent metal lens is a fact, and that it operates on such low electrical power with many different fluid sheath gas, liquids, CO2 , Helium or natural gas, propane, powdered coal solids. 

 INERT gas is needed for the Plasma sheath operation of Plasma Beams as required in our 1972 Plasma Beam patent--but not in our AEPB and associated Electronic Flame due to ion resonance within the fluid sheath, as electrons are emitted from our nozzles electrode, BOOSTED IN VOLTAGE driven by our RF TRANSFORMER and its driven RF generator. 

These electron modulated electron beams can dissociate molecules OUTER ELECTRONS at 33 eV per released outer electron due to the present of ion resonance and impedance matching at the same frequency between target and RF generators. Thus intense Infra red to Ultra violet radiation in our beam-target relationship is possible!

Do not mix the words describing Plant Plasma root Plasma Membranes treated by our Plant Plasma Solutions and Plasma energy beams.


                                                                                        翻译     переводить    TRADUCTOR--مترجم  Translate   

                             Or continue down for Video on AEPB



Video #1a Demonstrates the operation of the Electronic Flametm c driven by our (Atmospheric Electron Particle Beam) tm c (AEPB)tm c) generator through dissociation energy. 

Atmospheric air* directed through our nozzles, at a Fire Brick (ceramic) converts our AIR fuel to the Fifth State of matter, via our low frequency radiation Electron Particle Beam and its generated Electronic Flame. 


Back to Atmospheric Electron Particle Beam and Electronic flame design

VIDEO: PROOF OF ELECTRON PARTICLE BEAM CONTENT (AEPB ) and ITS ELECTRONIC FLAMEtm c

Click on the Flash VIDEO SCREEN FOR FULL SCREEN, ALSO ONE CAN SLOW DOWN THE VIDEO TO SEE INTERESTING POINTS

Refer to: Patent publish world wide in 2010. First to file 2008, again 2009 and first to invent US20100043729) Meets the new United States Patent and Trade Mark Office unfair inventor's patent law provisions passed by Congress and signed  into law by the President March 2013.



President Obama asked by a reporter about global warming at his first press meeting stated:

"We must get the Carbon out of the atmosphere"!

Atmospheric CO2 is also a pollution free fuel in the Electronic Flame (AEPB) generation. 

Editors Note: NASA also has published that we must bring down atmospheric carbon levels to 350 ppm (parts per million) in order to halt catastrophic global warming. THE TROUBLE IS WE ARE ALREADY AT 400 ppm and rising  2 ppm per year! (Currently exceeding 400 ppm)

Around 85 per cent of global CO2 emissions from anthropogenic sources come from burning fossil fuels, nearly 10 per cent from forest deforestation and the rest from cement production and other industrial processes.


An innovative Atmospheric Electron Particle Beam (AEPB) which 

1. Generates Beam Radiation and Hot Electronic Flames even melting most ceramics or stores energy in them even at 3500 beam watts! Some beams in the atmosphere are 2 to 4 feet tall from our specially design nozzles depending on the output transformers power in watts they are connected to. 

1a. However higher power, and multiple nozzles can do far greater than our 5000 watt output (8000 watts input) then the generator's nozzle does, at total weight of 129 pounds! 

That is what this manuscript has published/and Fripro has accomplished with 5000 watts. The added fuel from the atmosphere more than makes up for the power lost to heat (water cooled) in the RF generator part of out 129 pound system. ( Of course that water can also be recovered!)

2.Generates Plant Plasma Solutions for plant's membrane absorption, and plant growth, health and acceleration in even sandy soil! No fertilizer is needed!

3. Medical applications: CLEANER BREATHING IN POLLUTED CITIES. Removes and burns from the atmosphere CO2 and other fossil fuel pollutions content, oil, gas, water, thus more energy out than the input electrical power. Without removing current pollution generating fuels from industry! As the system generates nitrates it may be of use in the heart medical field.

4. Allows fossil fuels to be burned near pollution free when properly applied by industrial designed systems and arrays.

      (In no way are Fripro Energy, LLC  innovations, related to blood, arc plasma or Energy Beams (Plasma beams )              


FRIPRO'S new AEPB energy augmentations and Plant Growth Enhancer encourages joint R&D, design, licensing or production applications: outright sales are negotiable. Our prototypes are operating with years of testing both plant growth and Beam-Flame energy! 



*Our Earth's atmosphere (QUOTE: NASA) had about 400 ppm of CO2 gaining about 2ppm of CO2 per year.  Now reaching 400 ppm!


 Plant GROWTH SOLUTION click 

Plant Plasma Solution enhancer, opens the root's membranes to accept water, fertilizer, and the PPS that is added. Nearly dead plants, trees etc can be revived to great plants! An also helps clean our atmosphere.                                        or... continue on this front page


Other molecules exist in the Earth's Atmospheric air, and when disassociated by our AEPB nozzles AEPB also contribute to the Electronic Flames' fuel. 

Clean fuel energy from coal, oil, natural gas, water and the Atmosphere etc. is possible!



           click  Refer to the Electromagnetic Spectrum Chart For the AEPB's eV position 

The Atmospheric Electron Particle Beam's (AEPB) Power input point is at the RF frequency of 13.56 MHz. on the RF frequency scale of the Electromagnetic Spectrum Chart . Its output on a ceramic target is on the red to ultra violet frequency scale and is measured in electron volts eV.

RF generated Flame or Beam Energy gain 1X1010 eV at the Infra Red-Ultra Violet spectrum position on the eV scale on the EMS Chart. 

Measured with instrumentation here in our lab, our AEPB output on targets have no background BREMSSTRAHLUNG Radiation in any of the operating AEPB 's or their treated cool targets. Our generator system eliminates outside Radio Frequency Broadcasting even in the same room.  Which means we are not restricted to the 13.56 mhz science band.



Photo #1b (Electron Particle Beam's Ion resonance .)

The ceramic target energy heats to intense radiation due to (Electron Particle Beam's Ion resonance) due to the wavelength and length of the beams column!

 Photo May 30 2013  Electron's particle beam frequency within the fluid sheath. 

  

Refer to hyperlink: FRIPRO5 Photos patented Ionic oscillator.  When the two frequencies (The RF Generator input and the ion frequency with in the Fluid Sheath of the AEPB are near or on each others wave length the output of the APEB's is lengthily and more intense on target. 

The length of the above 2600 watt plume (AEPB BEAM) is about two feet. (Note: the beam was running at about one half of the power from the RF generator. The nozzle remains cool and is very simple in its design. When referring to the Ionic Oscillator hyperlink above the diode oscillator is compared to our nozzle beam system. 

The RF generated power at this still clip photo's video time was 3500 watts with reflected power of 850 watts, or (Black Box) transformer input of about 2600 watts after subtracting the 800 watts reflected power.  

Therefore the AEPB beam from the nozzle's output was running at half of the drive that our 5000 watt output RF Generator system is capable of! For reference the left edge of the transformer (Black Box) in the Photo #1b in real was measured 18 inches. The beam above measured on the computer's screen at about 24 inches or about two feet (only a good guess due to camera angle etc.)

AEPB length in Photo #1b can  also be estimated also by surrounding objects. Again note our full system weight pictured  is 129 pounds!


Disrupting the fluid sheath will cause the electrons to escape into the atmosphere out of the side of the fluid sheath--where ever a hole is made. It is almost has an analogy to the Pipe Organ's tuned pipe. If one were to drill a hole in the side of the pipe organ's pipe the output tone would be a corrupter to the musical ear.

Also when the input fluid sheath molecule (gas or what ever) volume is changed by the  RF generators auto frequency control we change the ion resonance of the AEPB and it changes to an Electronic Flame but not in Beam form! This is because the two frequencies of the RF generator and the AEPB do not match in ion resonance! All the videos if studied on our web site will verify this plus the Ion Oscillator hyperlink.  FRIPRO5 Photos patented Ionic oscillator. 


The targets melted surface of the ceramic is negative (of any shape or size) so the Cin the dissociated CO2 binds to the negative liquid or solid ceramic and is captured while the negative O2goes back into the atmosphere either as O, H2 or O!

Ceramic targets are charged negative by the Electron Particle Beam which dissociates most molecules, example: C+ from O2-  . The opposite of the early cave mans discovery producing heat from burning wood thus CO2   Entering the Earth's atmosphere. 

Each UV ionization of the outer electron of a molecule releases approximately 33 electron volts (eV) of energy each. Material surrounding the atom absorbs the energy. Compared to other types of radiation that may be absorbed, ionizing radiation deposits a large amount of energy into a small area.

In fact, the 33 eV from one ionization is more than enough energy to disrupt the chemical bond between the Carbon Oxygen atoms. All UV ionizing radiation is capable, directly or indirectly, of removing outer electrons from most molecules. Refer to:  (http://www.epa.gov/rpdweb00/understand/

Add that up, 33 electron volts (eV) of energy per molecule can be a lot of energy--supplying our AEPB and its target!


Our AEPB is not a Thermal CO2 Plasma, Blood Plasma, Arc Plasma, Plasma Beam and is not for NOx extraction filters. 

It is not for cold Plasma filters, chemical mixtures or other pollutants filters that the coal fired electric generating plants have been somewhat successful with, at a very high cost! 

             (Our new innovation in energy generation is NOT RELATED above...It is novel).


The air nozzle shown in the Video #1a remains near room temperature while the target Fire Brick (any ceramic) can be in the thousands of degrees F! Other higher melting point ceramics can also be used with other fluid sheaths directed at ceramic targets. 

Also other fuels can be used as fluid sheaths to (enclose the electronic particle beam). Natural gas, Oil, Water, Coal, CO2 , Dust. These molecules can be reasonably cleaned of their carbon outputs to or in the atmosphere. Then this output can be used again as a clean fuel fluid sheath for the AEPB, polluted outputs without further raising the target radiation temperatures of the Earth's local atmosphere now 400 ppm of CO2!

Video #2 Demonstrates a non-nuclear, non-background Bremsstrahlung Radiation  atmospheric Electron Particle Beam energy, in either the Flame or Beam source.

In the demonstration #2  the fluid sheath is inert helium, active atmospheric air mixture and electricity! (They are additive in energy input at its target ceramic). 

How ever the AEPB is not limited to just Air and Electricity, other fluid sheaths mixtures are possible. Including Natural Gas, CO2, Oil, Coal Gas, Water and others! 

Measured with an end closed ceramic Zirconium cylinder. When the AEPB Beam enters the cylinder it drags atmospheric air including 394 ppm of  CO2 and the air becomes additive to the ceramic's  cylinder's heat radiation storage, great for boiler heating even in submerged water tanks (as used in nuclear energy electrical power generation plants) heating of water to steam!

Even the Zirconium Oxide cylinder's dissociation is contributing to some heat output (almost like a fuel) a fifth state of matter itself?) which our beam can reach with THE CORRECT POWER OUTPUT, FREQUENCY AND (eV) volts.   And think carefully no nuclear radiation danger!

 Melting point Zirconium Oxide 2715 °C (4919 degree Fahrenheit), boiling point 4300 °C. Our Electrode remains intact for months of service.  Nozzles/Electrodes can be purchased for from 5000 watts RF, or DC output on and up. 

Prices are based on custom design and machined nozzles which we can furnish in two to four weeks after design request, licensing and PURCHASE deposits.  

             Angles!  If you really want real green energy and clean up the Earth's atmosphere--this is it! Contact:  423-765-1760 If busy call back or leave message.                        E mail click on Tanksher43@aol.com , either or both tanksher43@gmail.com


Lab testing shows: no Beremsstrahlung Radiation from the AEPB energy source in its Electronic Flame, its Particle Electron Beam or targets.         

anksh翻译   對於語音和文字    переводить    TRADUCTOR  --مترجم Copy and Paste in                               Translate for voice and text in any language





 

                  ......or.....TO: FRIPRO'S AEPB TABLE OF CONTENTS   

Or stay on this main home page for Atmospheric Electron Particle Beam (AEPB), ELECTRONIC FLAMETm c & Carbon Dioxide CO2 photos, videos, and hyperlinks to referenced material disassociation from any source (including atmospheric air) that its content is now above the present dangerous 400 ppm of CO2

Air further use as a synergistic fuel in our AEPB system including returning the oxygen component in several forms, from the BURNING  FOSSIL'S  CO2 back to the atmosphere storing the carbon "C" in negative charged liquid-solid ceramics applied by intense heat radiation from our AEPB generator.

Put the two (fossil fuels and Electronic Flame) together: Our AEPB generator and any source of CO2 (even other gases, solids or liquids) thru FRIPRO'S AEPB nozzle-generator for high radiation energy fuel.  (This novel technology possibly can be explained by the ion resonance of the double Auger effect*

Also the ionic oscillations, possible double Auger effect*in gas (mercury vapor, argon, CO2 and helium and other fluids) refer to U.S.  2,607,897 Oscillator  FRIPRO Photos of patented invention

The Fluid Sheath of the AEPB is a resonant column of Electron Particles near or at the frequency of the RF Generator therefore the energy on target is increased. When the two frequencies are near or at  13.56 mhz. Sort of like a Pipe organ's tuned resonant tone when the column of the pipe is the correct length, diameter and amount of air. The fluid sheath column is not restricted to inert gas.


Photo #17 Page_4. Shows a multiple nozzle burner

*Refer to: End of page Ion Resonance: U.S. Department of Energy, Office of Basic Energy Sciences (BES Operated by the University of California.




Advertisement:  OPEN DAYS (12 to 9 pm seven days) 

 

 

 

Advertisement: Click on sign to open for only computer help., Back to return




The AEPB generates what we named the Fifth State of Matter (1. Mass, 2. Liquids, 3. Gas, 4. Plasma, 5. Radiation)... Radiation Ion-resonance (refer as- Electron Volts eV (radiation energy) is applied and stored in ceramic targets. 

           click  Refer to the Electromagnetic Spectrum Chart For the AEPB's eV position 

The AEPB Power input point is at the RF frequency of 13.56 MHz. on the chart. Energy gain 1X1010 eV at the Infra Red-Ultra Violet spectrum window on the same EMS Chart. 

Measured with instrumentation here in our lab having no background BREMSSTRAHLUNG Radiation in any of the operating AEPB 's or their treated cool targets.



The ceramic target energy heats to intense radiation due to (Electron Particle Beam's Ion resonance.) The targets melted surface of the ceramic is negative (of any shape or size) so the Cin CO2 binds to the negative liquid ceramic and is captured while the negative O2-  goes back into the atmosphere in either as H2O or O2 .

Ceramic targets are charged negative by the Electron particle Beam which dissociates most molecules, example: C+ from O2_ .


         Our AEPB is not a Thermal CO2 Plasma and not for NOx extraction. 

It is not for cold Plasma filters, chemical mixtures or other pollutants filters that the coal fired electric generating plants have been somewhat successful with, at a very high cost! 

             (Our new innovation in energy generation is NOT RELATED above...It is novel.


The air nozzle shown in the Video #1a remains near room temperature while the target Fire Brick (any ceramic) can be in the thousands of degrees F! Other higher melting point ceramics can also be used with other fluid sheaths directed at ceramic targets. As the pressure of the introduced gas to the transformer/nozzle on any target causes the non=metal target to rise to or over its melting point- even its boiling point.

Also other fuels can be used as fluid sheaths. Natural gas, Oil, Water, Coal, CO2 , dust. These molecules can be cleaned of their carbon outputs to the atmosphere then this output can be used again as a clean fuel fluid sheath for the AEPB without polluted outputs further raising the target radiation temperatures of local atmosphere of 394 ppm of CO2!


REFER (eV) (Click on Hyperlink Electromagnetic Spectrum ChartRefer to the operational area of the AEPB. The Power input point is at the RF 13.56 MHz. A radio wave (R.F.)

Energy gain in the ceramic target 1X1010 eV at the Infra Red-Ultra Violet spectrum window. Measured with instrumentation there is no Background  Bremsstrahlung radiation in any of the operating AEPB 's or their targets. The RF radio frequency signal is not present anywhere in the room, (It is completely shielded by our Transformer).


.

PHOTO #1b Atmospheric Electron Particle Beam Nozzle (AEPB) did this to a fire brick when the compressed atmospheric (AEPB)  air was increased to greater flow rates as one would encounter in powdered coal or oil air injection into the burner/nozzle system of boilers, furnaces or other heat energy applications. Refer to Video #1a.

Note: the fire brick (above) is clean (except for the melted drop storing C dissociated from O2) when burning  compressed ATMOSPHERIC AIR having among others 400+ ppm of CO2!   For burning CO2 gas on the same type of brick ceramics at VIDEO #4b1  Continued below:   #4b1a CO2

Note: The melting point shown on the fire brick is an estimate but the manufacture's specification is 2732 Degrees F, but the boiling point is much higher in degrees F! The max. operating temperature in degrees F in boilers, blast furnaces or other heat energy applications is 2000F or about 1500 C. (Note these measured temperature were made in combustion heated test). 

Our Atmospheric Electron Particle Beam and Electronic flame do not work on the same pyrometer measuring device principal as BTU measurements they are in Electron Volts eV

The black glass drop is over the boiling point. Yet our nozzle remained clean and clear at room temperature, without water cooling! The air that contributes to the fuel of the Electronic Flame also keeps the nozzle cool! Also there is no carbon on the brick or nozzle, nor the ceiling above it.! Refer to patents/US20100043729 )  (both applied first and invented first)

Gases like CO2 alone is 400 ppm in our Earth's atmosphere and water vapor H2O, both are the reasons the AEPB works on Atmospheric air. Note the difference between the AIR OPERATED AEPB Electronic Flame brick and the CO2 added OPERATED AEPB, Electronic Flame brick targeted in #4b1a

Photo #4b1a The fire brick (In melted form negative charged brick (ceramic) has absorbed the carbon and sent the oxygen to the atmosphere as either Hydrogen, H2O or oxygen as viewed in the above flash video. 

Where carbon is in it natural form it conducts spider vein electrons across the bricks surface, and where the Electronic Flame of the AEPB has enveloped the + carbon ion from the CO2 it is stored in the negative electron ion charged melted brick surface) as pictured in the above fire brick! (Click on photo #4b1a for high resolution enlargement).  

Note: The O2- ion can pick up the hydrogen H+ ion in the target or Fluid sheath enclosed Electron Beam with water sent to the atmosphere as water vapor (also a fuel in our AEPB).


PHOTO #1c  Continue below for CO2 as a fuel. Removing carbon from the atmosphere

       VIDEO #4b1b Click anywhere on the above on Sample #2 for Flash video, then use full screen showing a close up of CO2 added as a fuel into the AEPB beam, the target fired melted brick captures the carbon. 

Right click (in Flash) to full screen, then on the full screen right click on Play Speed set to: Slow).  This will show the close up of the CO2 action and the beam and flame area across the face of the target fire brick.

Video #4b1 filmed during the lab test of CO2 injection at 10 cubic feet per hour, 5kw input only from our IC Transformer. The video test brick became so hot it had to be turned off. 

THE MOST INTERESTING PART OF THIS TEST proved that other gases i.e. CO2 and natural gas can be use again as a fluid sheath for the Electron Particle Beam as a fuel in the AEPB. after carbon capture in the melted ceramic.

                This is a great moment in the fight against removing CO2 from OUR ATMOSPHERE. Our company is not interested in the capture of CO2 (Even though we have done so) but more interested in burning the CO2 as a fuel in our AEPB Electronic Flame for producing pollution free high radiation energy heat etc. It would be flame energy that is purer than natural gas in you kitchen stove!

Those that have learned to capture CO2 from the atmosphere by many different methods can pipe the CO2 to a AEPB generator location for radiation energy heat source (non-radio active). 

Multiple nozzles arrays and burners are possible! It also means we are not replacing the fossil fuels we now use but cleaning them up and using the results as a cleaner fuel!


Dissociated Carbon

It is also possible to produce carbon in ceramic targets surfaces through the AEPB Air nozzle. Fripro has dissociated carbon refrigerator filters to carbon dust through the direct contact with the AEPB as electron particle beam energy--when the equipment is designed and built properly. 

Whether one can remove the carbon as a powder directly from the atmosphere in greater volume is the subject of research! More likely it would be produced from coal.



President Obama when asked by a reporter about global warming at his first press meeting stated:

"We must get the Carbon out of the atmosphere"!

Editors Note: NASA also has published that we must bring down atmospheric carbon levels to 350 ppm (parts per million) in order to halt catastrophic global warming. THE TROUBLE IS WE ARE ALREADY AT 394 ppm and rising  2 ppm per year! 

Not only must we get the CO2 out of our atmosphere but we can also use it as a pollution free fuel for radiation heat generation in the Fripro Energy, LLC's flame or beam  form.

All the CO2 we are pumping into the air right now will stay in the air for a length of time comparable to recorded human history. (Unless we remove it as we use energy)

There are no other known methods to remove CO2 from the air on the scale that the earth's population is emitting it!
The only answer is innovation....Refer for detailed theories and facts on radiation dissociation of molecules log on to: (http://www.epa.gov/rpdweb00/understand/



Video #4b2 click on blue link  He AEPB WELDING ZrO2    

                                Note: Video #2 the cylinder is horizontal, but Video hyperlink #3a the same cylinder is vertical, also the beam is outside welding the crack. This is a very high temperature ceramic welding beam, depending on the power and generators frequency output to the nozzles. Hyperlink Movie ZiO He AEPB WELDING ZrO2 welding with the AEPB.

                                                      翻译     переводить    TRADUCTOR--مترجم  Translate   

          LET YOUR MIND EXPLORE THE MANY USES OF THIS NEW (non Nuclear) HEAT ENERGY ELECTRONIC FLAME, _and electron particle beam mass to radiation energy. 

   Contact Tanksher43@aol.com either or both tanksher43@gmail.com or call 1 423 765 1760



 
 
 
 
 
 
 
 
 
 
 
 Video #4
 
 
 
  
 
 
 
 
                    
Video #4 This an amazing lab test video and sound of the Fairbairn Effect when 
throwing powered sugar into the AEPB's Electronic FlameC-TM. After the powered 
sugar drifts to the floor intense light explosions can mostly be seen by the Video 
Camera and last for about a milli second. 
Even a CO2 dust size particle in beam can change to radiation in the form of light in our 
atmosphere that lights up the whole room the generator AEPB is operating in!
 
The human eye hardly catches the light blasts, as you can see a staff member walks 
right by it and not noticing it. We have observed these light explosions when there 
were no targets. It may even be a dissociated dust or other unknown particles in the 
rooms air! 
The voice of the camera man (test scientist) is heard--he did see them as he was 
looking directly at them. 




For text/photos of plant seed germination in sand and their growing in low nutrient soil, hyperlink directly to our Plant Plasma Solutiontm c enhancer pages at  PLANT PLASMA SOLUTION 2012 on this web site. 

                                                                                          翻译     переводить    TRADUCTOR--مترجم  Translate 




ONE OF THE MOST IMPORTANT INVENTIONS OF OUR PRESENT-DAY CLEAN ENERGY SEARCH. IMPORTANT PROOF AND DESCRIPTIONS OF THE ATMOSPHERIC ELECTRON PARTICLE BEAM (AEPBc tm ) AND ITS GENERATED ATMOSPHERIC ELECTRONIC FLAMEc tm - A NEW ENERGY TECHNOLOGY THAT ONE SHOULD NOT OVERLOOK!

                                                                                        翻译     переводить    TRADUCTOR--مترجم  Translate   

Note: The Electronic FlameTM C In Photo #1 above has no temperature when aimed directly 

into our atmosphere (photo) as measured by independent observers. The reason being the 

radiation spectrum is white light, and it created Ozone!

Only when a ceramic target, Fire Brick etc. is added to the Flame the temperature goes off 

scale beyond the test observers temperature meter. The greater the air flow + into the target

 brick (any ceramics) the higher the temperature even to its boiling point!


Important fact: Both the Electrical Input and the air supplied Electronic FlameTM C are

additive to the energy output from the brick target. As atmospheric air is a fuel and the 

energy created in the ceramic like target is greater then the electrical energy supplied

to our generators. 

REFER TO Page_4 for demo in Video and sound of cardboard insertion into AEPB 

Electronic Flame. A very important key video to operation of the AEPB.

Other fuels like natural gas can be added for cleaner burning and thus synergy in action!

If coal gas or other gases are added to the nozzle when operating, it is more so additive in energy output! 

The fire brick (ceramics or glass etc.) may also be contributing to the heat output and 

storage through molecular dissociation.

The Fire brick  PHOTO #1b (Standard boiler liner yellow color) target also stores the heat 

energy generated for short periods of time depending on the surrounding atmosphere, 

or any enclosure:

Refer also to Photo #7 showing a three inch high sulfur coal lump  is white hot in the 
Electronic Flame, no smoke or soot! Further proof of the action of the AEPB in the 
atmosphere must also be explored for particle action as shown in the Fairbairn Effect. 

                                                   Fripro Energy, LLC  The new patent law that activates March 2013.
                         We have filed first and invented first both in USA and Internationally 
             patents/US20100043729 )             PATENT INTERNATIONAL APPLIED |WO2010022197
                                             PATENT PENDING US20100043729    PATENT 3648015 COPYRIGHTS   PATENT INTERNATIONAL O2010022197    PATENT 22573138/.

           For detailed technical data, please continue on this page


To: spotlighted videos, photos or other information:  COPY AND PASTE INSIDE 

OF Translate AFTER CLICKING ON Translate         THEN CHOSE WHICH LANGUAGE

                                                                  翻译     переводить    TRADUCTOR--مترجم  Translate  




Please continue for detailed technical data on this page: or refer to page_2 for 

simplified technology.

Our non technical friends might ask how do we know if your companies Electronic Flame shown in 

Video #1 might be burning a natural gas alone? It is not, but can be used nearly CO2 free as an additional fuel?

Proving otherwise In the Video #1 the copper electrode is still copper color and is therefore at room 

temperature.  If gas or any other combustion fuel were emitted in a combustion flame the nozzle would 

soon be black and so would the fire brick.  In the Video #1 above the brick is clean!   

 

If the reader views the operating copper nozzle closely in Video #1 above, one can time from start of the 

flame to viewing the red hot area in the 2,500 F fire brick surface and they will see it is red hot 

(1200 F degrees PLUS) in real time in less then 12 seconds on less then 4KW! Yet copper melts at 

about 1700 Degrees F (The nozzle being made of copper). Fire Brick (Boils) over 2700 Degrees F!

When the compressed air was increased the fire brick's temperature rose in about 40 seconds to 

boiling liquid! (Refer to the actual fire brick targeted in Video #1 above, also.


VIDEO #4b Human hand insertion test into AEPB beam  (non-edited video and sound)

Excellent demonstration of the vertical AEPB in action into the atmosphere, with out a target electrical return circuit. Note different reactions to thick gloved, latex and bare hand when the electrical sensation of shock is demonstrated! 

Note that high particle pulse rate of the AEPB is a surface reaction on the human hand.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

Both VIDEO #1 and VIDEO #2 above operates in either an electron particle beam or flame form. Thus generating INFRA RED TO ULTRA VIOLET RADIATION flame and/or electron beam ENERGY.

Refer to: US patents/US20100043729 ) (Includes the patent's Front Page, Page Images, Description of Claims). Also

FRIPRO ENERGY's Proof of the electron beam content of the AEPB on video and sound  (Click on blue hyperlink)


 Our AEPB technologies can be utilized by you’re own research and development teams, and will contribute to you're solving technical, operational problems or development of new energy efficient products.  

Example: CO2 collected from the atmosphere can  be burned as a fuel in our AEPB nozzles connected to our 129 pound generator.   polllution free!)  scientists-create-device-to-remove-carbon-directly-from-the-air/   ]

Collect, store and pipe CO2 and we can burn it as a fuel pollution free returning only the oxygen back to the atmosphere     


 

     VIDEO 4B1 CO2 DISSOCIATION AND CONVERSION PROCESSES, 

IN OUR AEPB Nozzle. CARBON POLLUTIONS ARE  EATING OUR LAND, 

CO2 IS A FUEL IN OUR (FRIPRO'S) ATMOSPHERIC ELECTRON PARTICLE BEAM (AEPB).  

click on blue VIDEO METHANE 

Gas input to AEPB nozzle prior to adding AEPB ENERGY.  NOTE deposits of carbon on target brick.  

  President Obama when asked by a reporter about global warming at his first press meeting stated ,"we must get the

Carbon out of the atmosphere!


                                              


                                             翻译     переводить    TRADUCTOR--مترجم  Translate 


 
       STILL PHOTO #4C BELOW  AFTER ADDING AEPB (Electron Volt energy) to the nozzle 
emitting burning METHANE Gas shown in the above HYPER-LINKED Video Clip. 
(NATURAL GAS WOULD BE NO DIFFERENT)
Important: THE OPERATING AEPB REMOVES the CO2 and carbon deposits caused 
by atmospheric oxidation of the burning Methane Gas OR Natural gas. 
Note: The carbon removal on the brick shown above Photo 1b where the Electronic Flame 
enters the target ceramic fire brick. Methane is dissociated as also we have shown that 
coal gas and other gasses, liquids and solids are dissociated into their basic molecules 
by our technology.
      REFER TO PHOTOS #5,6, AND 7 FOR DEMONSTRATIONS IN VIDEO Methane's CARBON deposits

 

 

 

 

  

       

 

 

 

 

 

STILL PHOTO #4C above, METHANE GAS, Natural gas does the same, after the AEPB RF ENERGY is turned on

the FIRE BRICK TARGET shown in this HYPERLINK (METHANE Video) and above PHOTO#4C

The video will show in flash inside the above #4C photo for comparing the two.  No carbon or soot in the

Beam's AREA OF COVERAGE ON TARGET BRICK. Not so before the APEB energy was not present.

               Obvious increase in the energy to the target (Ceramic Fire Brick). 

(Synergy in action)

In the AEPB generator particle electron output the radio frequency generator operates at about 13.56 Mhz, 

at 5000 + watts. When the particle electrons hits the atmosphere or a target ceramic it ups it wavelength to 

the electron (particle) beam position on the electromagnetic Chart (Click on Hyperlink) 

Electromagnetic Spectrum Chart Thus even more energy from the combination of both fuels directed at 

the fire brick (any Ceraamic). STILL PHOTO #4C

 

Once the AEPB ELECTRONIC FLAME gives up BOTH energy SOURCES to the ceramic (includes other 

solids I.E. coal target its energy can subsequently be released. 

However the target ceramic preferred material stores the higher energy according to its input energy 

position shown on the Electromagnetic Spectrum Chart. (Infra red to UV).

 

Nitrous oxide (N2O)  is a greenhouse gas that is 298 times more potent than carbon dioxide CO2. (New York 

Times 9/14/12). Refer to our PLANT PLASMA SOLUTION 2012 web page as to how we can solve this long 

term over a century Farm problem also.

 


                        翻译     переводить    TRADUCTOR--مترجم  Translate     
      

Photo #6 Below Using CO2 on sand stone in the AEPB together Nozzle CO2 at 1 SCFH mixed with fluid gas sheath at 2 SCFH gas, to keep out the oxygen atmosphere



Photo #7 Below. White hot chunk of coal 6 sec. within the Electronic Flame, no smoke!

Photo #7 Above three inch chunk of high sulfur coal in the electronic flame in ten seconds glows smoke free, white hot.

 IF THE LUMP OF COAL shown in Photo #7 above IS LEFT LONGER IN THE ELECTRONIC FLAME IT WILL TURN DARK GLASS-LIKE  IN THE AREA OF THE FLAME CONTACT. FRIPRO ENERGY CALLS IT Coal Glasstm c !WHERE DID THE CARBON GO?


  Copy and paste then click on Translate

The Hypothetical formula for Mass to radiation in the AEPB is:

Mass = Kf Nu    Nu being frequency, or when convert to electron volts (eV)**

Kis the Ether constant in space. Mass is in grams. The higher the Mass in grams of the electron wave front the higher the impact energy on its target. 

Its position is indicated in the ELECTROMAGNETIC SPECTRUM CHART . The electromagnetic wave front has an equivalent mass in grams and can be converted to electron volts (eV). 

           Matter Transport <wev 

w  is omega in the character state of matter transport, only in the formula below:

The mechanism of transport** wo << wp < veo <wev  

wo is the RF generator's radio frequency, wp is the plasma sheath (He) ion resonant frequency,  veo  is the electron-neutral collision frequency, and <wev is the radiation electron particle beams output from the nozzles numbering one or more, connected to the AEPB's <wev  transformer RF system and Fripro's nozzles compound's fluid sheath, directed at a ceramic (compound) target.

wo << wp < veo *     *Dr. D.B.Fenneman U of  I and China Lake

wo << wp < veo <wev  **Thomas Edward Fairbairn CSCS -  Maumee, Ohio 

 

Copy and paste then click on Translate

 

Click on blue hyperlink to view a analogy of Matter Transport <wev  

Fermi Lab's  CERENKOV's MOVIE of the back up for the Ether constant in space  K   http://vmsstreamer1.fnal.gov/VMS/Samples/Cerenkov.ram

           Refer to page_2 for simplified text of our technology.    


   Details are very well shown in Fairbairn's \US and World first to file and first to invent: patent publish 2010, filed, 2008 and 2009 /US20100043729 )  Hyperlink

This copy of the patent above, Includes its Front Page, Page Images, Description and Claims). Filed in 2008, 2009 and published 2010. Also filed internationality including copyrights and trade marks.  .Meets the hew US patent requirements March 2013.

 

Photo #5 For A CLEARER BLOW UP OF THE ABOVE PHOTO CLICK ON THIS HYPER-LINK Volcanic glass carbon in Sandstone     ONE CAN VIEW THE SAND STONE BOILING WITH THOUSANDS OF BLACK BEADS

 

 

 

 

 

 

 

 

 

 

Photo #5 above Using Propane gas plus the AEPB on sand stone in the AEPB Nozzle at 2 SCFH gas, temperatures in the thousands degrees F were generated

 Note: Estimate of many of hundreds of  thousands glass like balls per square inch. 

Sandstone shows the effect the AEPB and Propane (C3H8) has on the sandstone target, thus creating the black glass shown in the photo #5 above. Also in an on line Movie and sound (click)   DISSOCIATION C3H8 PROPANE POSSIBLE DIRECT CO2 STORAGE On UTUBE

Note: Without the injection of the gases, the sandstone is nearly clear glass with possibly Si and other molecular mixtures as the sandstone is not clean sand.

Lower gas or powdered coal usage with atmospheric compressed air in the AEPB, stretches the gas or coal supply availability, lowers their price, with nearly little output stack emissions depending on power and applied conditions.

The AEPB's (electron particle beam) ability, through synergism, can in certain conditions, capture/store a carbon residue (CCS) from propane, natural gas, powdered coal, all injected within the AEPB and its generated Electronic Flamec tm.  


Photo #6 top left. Sandstone photo shows less than one SCFH of CO2 introduced to the AEPB Beam nozzle an atmospheric electron beam on the target. The amount of carbon deposition, which may or may not be in the sandstone pictured in the photo to the right, is very small because of the supply at less than 1 SCFH of CO  

The target and beam were as bright as the sun and required very dark glasses to view. Time on target less than 10 seconds! 

CO2 is also part of the atmosphere therefore in a sense a fuel for the AEPB, has already been realized.  Refer to Video # 8  Page_4 Cardboard Insertion into the Electronic Flame.

This is very important as combustion stack emissions (soot) CO2 can be stored and rerouted back through the AEPB Generator, producing added energy that would be lost to the atmosphere through chemical combustion. 

 


To understand how the AEPB Generator operates, apply this logic: 

When energy units are separately employed on a target, one unit of energy (called an electron particle energy) and one unit of chemical energy identified as fluid energy (propane gas plus Oxygen C3H8 + O, or water H2 + O) is utilized in the following manner:

VERSES:

When one electron energy unit and one fluid energy unit are combined through the AEPB nozzle's fluid sheath at the same target, the formula is now 1 electron energy unit + 1 fluid energy unit = synergistically added energy units applied at the target.                            

  This combination of energy units is called Synergism.

One AEPB unit of energy may have more energy then one chemical combustion Fluid unit of energy. (Energy units employed are variable).

Fripro Energy, LLC's (CEO)  filed US20100043729  both first and invented first--with respect to the new patent law (MARCH 2013) of the USA! Now assigned to Fripro Energy, LLC. 

Thanks to the work of Richard Hanson MBA,CBA  Director Manf. &Tech. SBDC University of Toledo Technology Center #1.

Fairbairn also owns the copyrights to patent # http://www.freepatentsonline.com/3648015.pdf

FURTHER DEVELOPMENTS WITH COAL:

FRIPRO has produced in is lab a product from raw coal we named COAL GLASStm c
By directing the electronic Flame into raw coal of various sizes, a thick black glass like material results. The raw coal is exposed to extremely high temperatures (4000F+) and glass material is formed in less than ten seconds. The coal is not consumed by exposure to the flame but is transformed. No emissions of hydrocarbons (smoke) are evident or sighted. How can the coal companies miss this? Other emissions (from the coal target) may also contribute to the temperature of the coal as it makes the Coal GlassTm C

The introduction of fossil fuels like coal or natural gas to the AEPB can give a synergistic additive-thus serve as a possible cleanup of the present combustion fuels like oil, gas, wood and trash. So we do not have to give up our present pollution producing fuels when using the AEPB technology! The soot and other pollutants i.e. methane can be removed or converted to safer molecules.

Many combustion flame pollution outputs are avoided in the operation of the AEPB a non-vacuum Atmospheric Electron Particle Beam Generator. Again note in photo Photo #2a the brick is clean!   No carbon residue!

IF compressed air pressure (SCFH) flow is increased (Refer above to Video #1) the Electronic Flamec tm gets hotter on the ceramic target a non-electrical (electron) conductor. However research indicates that the boiling fire brick's molecules may conduct the electron particle beam further into the brick's surface area thus extending the area of melt and heating! 

Refer to the ELECTROMAGNETIC SPECTRUM CHART for input and output range ((between 10-8 (eV) to +10+2 (eV) = 1010 (eV) a rise of 1010 (eV) input to output of the flame on the target)). 

Ceramic's radiation output at 102 (eV) is where Infra red to UV  is the positioned (of the heated fire brick) flame energy heating, 

On the ELECTROMAGNETIC SPECTRUM CHART : The Photon one electron volt (eV) energy X axis located at the charts bottom. Then referring to the chart at: SOURCES designated RF cavity where our transformer input AEPB's electron beam to the target is at 10-8 (eV). 

Then view infra red, light and UV on the ELECTROMAGNETIC SPECTRUM CHART  chart,  COMMON NAME OF WAVES at 10+2 (eV) is the above target brick's output point in radiation (heat energy) output.       

           Toggle full screen for best view, or F11 for all Videos, Photos or Hyperlinks.  Refresh browser F5 often for latest data

Video #8 & photos of live tests of the FRIPROc tm non-vacuum chamber very high energy Atmospheric Electron Particle Beam Generator (AEPB)c tm and its Atmospheric Electronic Flamec tm   

LONG%20TEST%20VIDEO%20VG%20hand%20held%20MVI_0153_f.mp4&amptype=video&ampwidth=640&ampheight=500&ampautostart=false&ampimage=http://web28.streamhoster.com/fripro/h264_133_4500kbps_LONGTESTVIDEOVGhandheldMVI_0153_Thumb.jpg">

 

 

 

 

 

 

 

 

 

 

 

 

 

Video #8  Our Atmospheric air operated Electron Beam alone or when inserting most fossil fuels, example coal dust, natural gas, hydrogen even cardboard into its Electronic Flamec tm ; little CO2 or smoke is emitted. The energy output is considerably increased in the red, visible, and infra red spectrum through Synergism.  When ever we have seen smoke generated outside of the Electronic Flame area in lab test the smoke would migrate back to the Flame column and disappears. Refer to Sample Test Charts #2 and #4 end of this page.

Webster's Synergism: The interaction of elements that when combined produce a total effect that is greater than the sum of the individual elements.

  & photos of live tests of the FRIPROc tm non-vacuum chamber very high energy Atmospheric Electron Particle Beam Generator (AEPB)c tm and its Atmospheric Electronic Flamec tm         

REFER TO Page_4 for second copy of this important technology at work in our lab prototype. Lab demo Video #8 (Video and sound) of cardboard insertion into AEPB of the still photos below!                                        

#8a Cardboard target fuel inserted 1+1 = SYNERGISM

Note: when the cardboard target fuel (Fluid Energy) is inserted in the Electronic Flamec tm , the background of the room lights with high intensity--including amber, infra red, red, and heat radiating toward the ceiling. (Also seen in Video #8 above ). Not true in photo #8b.(right)


But when the cardboard target (Combustion Energy) is pulled out of the Electronic Flamec tm  (Electron Beam Energy) the room is dark to the camera. Refer  #8b

Please note there is no damage or feeling of heat radiation energy to the human hand, even though it is right up against the Electronic Flame'sc tm   Plume.

                            #8b 1 and 1= NO SYNERGISM

The cardboard flame alone is not enough to light up the room for the camera. When the Electronic Flamec tm is without its target, seen in photo #8b with the burning cardboard. The Plume returns to a long vertical light radiation column.


Try examples: coal powder, water vapor, natural gas, hydrogen, or propane directed into our Electronic Flamec tm  in place of the cardboard target, together with or without atmospheric air! 

Synergism is a given name describing multiple energy outputs to the AEPB Electron Particle Beam and its Electronic Flamec tm

Again review the Video #8 above to see this action in real time.

  Webster's Synergism: The interaction of elements that when combined produce a total effect that is greater than the sum of the individual elements.


Water MIST (with soap) sprayed into AEPB Electronic Flamec tm Hydrogen is generated 

 Though a very short video one can utilize the forward, backward, and stop motion play. ( left click and hold mouse on video play bar at bottom of video screen, move play a frame at a time).  One can also notice that the CO2 from the glass blower's breath increases the Electronic flame's energy!


 

                                         TO: FRIPRO'S TABLE OF CONTENTS or

To Page_ 2




http://www.fripro.com/wizardFRIPRO2.htm OUR COMPUTER SERVICE WEB SITE ASSOCIATE.  PC COMPUTER HELP AND LAPTOP SERVICE AND CONSULTING;



For further contact inquiring with reference to our two major product programs business opportunities, the Atmospheric Electron Particle Beam and its Generated Combustion Free Electronic Flame, or for Plant Plasma Solution Generators,for food plants or flower plants Growers or other chemical compound generators , inquire:  

FRIPRO Energy, LLC phone Mr. Terrence Sherman President and Director of Marketing Operations, Marketing, Investment, and Licensing Headquarters.   Or email:   Tanksher43@aol.com

Request for postal address or for further contact technical support Mr. Terrence Sherman call 423-765-1760.  

Cooperative Testing is invited, in joint R and D, Distributors agreement or other ventures requests. including Stock partnership shares/Ohio State Tax Credit program is also available. Refer to  C:/FRIPRO.COM/new_page_3.html|

 

                  More video and text data Continued on  Page_4



 

                         World Map of countries logging on to our web site www.fripro.com 

                                                           As of this date 

Shows world map (Provided by our subscription to Stat Counter Dublin Ireland)



also a Reference: Courtesy of the *Ion Resonance: National Laboratory Operated by the University of California at Berkley. http://www-als.lbl.gov/index.php/research-areas/physics/282-a-hollow-ion-resonance-of-unprecedented-strength.html* U.S. Department of Energy 

 (a possible explanation of  Electron Particle Beam (AEPB) intense electron ion emission {AEPB) of fluids (i.e. Helium, fossil fuels,water,CO2) in the operation of the AEPB ..........


Bloomberg News
Chamber's Donohue Comments On Intellectual Property Enforcement

More than a quarter of all jobs in the US are with companies that rely on patents, copyrights and trademarks to protect products from competition and promote investment, the Commerce Department said. About 27.1 million jobs in 2010 were in industries that rely heavily on intellectual property protections, and another 12.9 million positions were indirectly affected.

"We must ensure that American IP-intensive industries remain confident that their copyrights, patents, and trademarks will be enforced," Thomas Donohue, the president of the U.S. Chamber of Commerce, said at a White House event announcing the report, 2012.

FRIPRO Energy, LLC will enforce its intellectual property rights and ownership, as Early as Patents 1970 registered patent at the Patent office in Thomas E Fairbairn of Galion , Ohio SA never assigned and still registered at the PO as Fairbairn unassigned, all copyrights belong to Fairbairn.Limitations on Reverse Engineering, Decompilation and Assembly for the purpose of generating the Plant Plasma Solution PPSTM C Formula or the Atmospheric Electron Particle Beam AEPBTM C. and or their Molecular Chemical Generator. You may not reverse engineer, decompose or assemble the Generating Equipment or  make a form of Plant Plasma Solution TM C formula, except and only to the extent that such activity constitutes a fair use under applicable copyright law, or has a legitimate business purposes of accessing information that is not protected by any intellectual property rights, or is otherwise permitted by applicable law notwithstanding this limitation. 

Quote New Yor Times Aug.27, 2012 Velvin Hogan, the foreman of the jury in the Apple-Samsung case, said in a phone interview on Saturday that the decision should send a “clear message” to the industry that companies that violate intellectual property will have to pay a penalty, like the one Samsung officials face. “They took the risk and it caught up with them,” said Mr. Hogan, 67, a retired electrical engineer who holds two issued patents himself and has a third pending.

Our complete Web site (FRIPRO.COM) can be copied and shown for education purpose not reverse engineering.




To: spotlighted videos, photos or information:

HOME PAGE |FRIPRO'S TABLE OF CONTENTS | PAGE 2 | PAGE 3A|| PAGE 4 | PAGE_5 | contact:Tanksher43@aol.com | ELECTRONIC FLAME EFFECT | BORON SILICATE GLASS ACTION | HYDROGEN WATER MIST | VERTICAL CERAMIC STEAM GENERATOR | FIVE STACKED CERAMIC CYLINDERS AEPB | SILICON CARBIDE BOILING | AEPB VIDEO BURNER | CERAMIC HEATING | AEPB OZONE | PATENT INTERNATIONAL |WO2010022197 | ENERGIES IN (eV) | PC & LAPTOP COMPUTER HELP | THOMAS+EDWARD+FAIRBAIRN | COPY & PASTE==THOMAS EDWARD FAIRBAIRN IN GOOGLE.COM | METHANE CARBON VIDEO | CARBON IN SAND |i COMPRESSED AIR | ELECTROMAGNETIC SPECTRUM CHART | FAIRBAIRN_EFFECT_SUGAR | PLANT PLASMA l PAGE_6 ASK ON LINE A TECHNOLOGY QUESTION l

anksh翻译   對於語音和文字    переводить    TRADUCTOR  --مترجم                        Copy  for voice and text in any language. Then click on Translate paste in left box then copy from the new translation and paste it where ever you wish to use English and another language at the same time,  in--say e mail or other printed copy.

                        Do the same with any text on this web sites' Manuscript

 

TO: PLANT PLASMA GROWTH SOLUTION PAGE

                                                                           翻译     переводить    TRADUCTOR--مترجم  Translate 

1. هذا هو مخطوط الفني للعلماء والفيزيائيين والكيميائيين والمهندسين، والطاقة أما المزارعين ومشغلي الاحتباس الحراري مقدمي المبتكرين.

2. Это технический рукописи ученых, физиков, химиков, инженеров, инноваторов, фермеры, Парниковый операторов и поставщиков энергии.

3. 这是一个科学家,物理学家,化学家,工程师,发明家,农民,温室运营商和能源供应商的技术稿件。

4. 과학자, 물리학 자, 화학자, 엔지니어, 전문가, 농부, 온실 운영 에너지 제공 업체에 기술 원고입니다.

                

patent pending Published/US20100043729 ) 

                                                          International (2006.01): F22B 1/28; F22B 9/00; G21K 5/04; H01F 27/28
                                                                                 European: G21K 5/04; F22B 1/28B

                                                               Provisional application No. US 61/90500 00, filed on 20-Aug-2008.

                                                                                Provisional application No. US 61/209198 00, filed on 04-Mar-2009.

END

 

 

StatCounter - Free Web Tracker and Counter