FEC ENERGY SUMMARY

_{ENERGY SUMMARY}_{FOR OUR READERS INTERESTED IN
OUR} _{ALTERNATE ENERGY TECHNOLOGY}

Parties interested in further discussion or availability of our systems, innovations, patents, licenses, and multiple copy-rights presented on this site, contact:

For a full list of patents issued or pending assignment to FEC with full copy rights reserved. RETURN TO OUR TECHNICAL DATA SITE

An interesting side issue of the above technology is allied to the Health Industry--utilization the ceramic tube radiation heating refer to the photo below titled: Ceramic Tube Radiation Heating via the Beam Nozzle Inserted

This Electronic Flame Nozzle Video is utilizing atmospheric air (which contains Methane, soot pollution and CO₂) for a fuel to heat this high melting point Zirconium Brick! The nozzle is driven by electrical energy. Multiple nozzles can be constructed in arrays (burners) or in ceramic tubes, for many energy uses. Hydrogen or other gases can be injected to up the output heat energy.

In short we are converting atmospheric air, together with electrical energy, to burn the fuels (Pollutants in atmospheric air) then converting these pollutants via the output nozzles, to heat energy stored in high melting point ceramics (Zirconium melts at 3371°F,1855°C), or ceramic tubes, and used again.

Clicking on above photo for movie of the atmospheric air (gases) driven Electronic Flame Nozzle operation. Shows the Zirconium brick is white hot and has a red hot outer boundary; U.S. patent disclosure 61090500 Energy Beam Nozzle/ Electronic Flame Nozzle. Also actual reduction in parts per million of CO₂ gases is an easy test for the nozzle systems.

Output of the electrically driven nozzles converts mass (gas, liquids or solids) to radiation (which is heat energy) storing the radiant energy generated in a zirconium ceramic brick, or in other high-tech tube ceramics. The tube system can be cascaded or U installed in enclosed heat generators.

Our latest R and D product the RF Capacitive Inductive Network^c (RFCI Network)^c matches our nozzles emitting the Atmospheric Electron Particle Beam^c. Includes RF generator five thousand watts output driving the atmospheric electron beam nozzle.

Showing an helium-hydrogen energy beam of 5,000+ watts aimed at (and spot melting) a zirconium rock, and no grounded return. Hydrogen used only to enhanced the beams energy--even water vapor could be used.

Further research with water vapor is needed as it is believe in preliminary test that the water is dissociated by the Energy beam and oxygen goes off into the atmosphere and the hydrogen is converted to radiation (heat) energy stored in ceramics.

Whether the hydrogen can be recovered is another thought. One of our engineers said he thought a Sterling Engine could be operated by the beam or electronic flame system heat store in a thermo bottled brick heat battery storage system.

Zirconium melts at 3371°F,1855°C, The center of the beam is an electron beam, due to the nozzles construction and operating configuration.

The gas in the beam is converted to low frequency radiation's and stored in the ceramic rock shown.

Ceramic welding at very high temperatures, including precise very small rivet (both metal and ceramic) head welding on lower temperature material. Our system can be computer controlled directly connected to our system from your computer

Above a three foot plus long 1/4 inch outer wall thickness zirconium ceramic tube, or other ceramic (high temperature) tubes are heated to their full length generating infra red, red, and other higher frequency radiations. Many variables for tube design can be utilized for heating, i.e. U tube, straight, coiled, with nozzles directed into various tubes at both ends if desired.

Many different gases can be utilized even atmospheric air. The blue output electronic flame is an air plasma. Zirconium melts at 3371°F,1855°C, it boils even higher. Ceramic tubes within tubes can even give more efficiency for transfer of heat energy to the work.

An interesting side issue of the above technology is allied to the Health Industry--utilization of the Ceramic Tube radiation heating. Refer to the above photo titled: Ceramic Tube Radiation Heating

Parties interested in further refinement, discussion or purchase of any of these opportunities, technology, or solid state systems presented in the FEC's energy field--contact:

Captain Terrence Sherman

VP Operation/Marketing

                              423-765-1760
                        Email: friprovp@charter.net

                         Or:

                              East COAST Contact:
                         Stewart Meyers ENGINEER

                         718-238-0123

                          Email: studragon37@aol.com

Or write:

                                     Business Development

                         Att: President
                         FRIPRO ENERGY CORPORATION (FEC)
                         Post Office Box 808,

                         Maumee Ohio, USA 43537

_{FEC's ALTERNATE
ENERGY TECHNOLOGY}

RETURN TO OUR FULL TECHNICAL DATA SITE for a full list of patents issued or pending assignment to FEC and full copy right reserved.

TRANSLATOR copy and paste text and choose language
Note: Many new inventions are in progress at FEC and can not be further disclosed here in: Our representative above would be glad to talk to you further .

Our Patent law firm is: Husch Blackwell Sanders LLP Welsh & Katz Chicago Ill USA. Accountants: Jerry Hill TREASURER FEC (Hill Associates Toledo Ohio). Corporation attorneys Daniel J. Scher Great Neck, NY 11021,FEC Corporate Offices and Labs: Post Office Box 808, 43537 Maumee, Ohio USA.

                  For complete TECHNICAL SPECIFICATIONS, data, and photos': RETURN TO OUR FULL TECHNICAL DATA SITE

                                                Our web site Home page is: www.energyFEC.com .

_{From
prototype to production, we will work with you to provide the optimum, cost
effective solution to your demanding application.}