New Page 2

The ability to augment the non-vacuum electron beam (AEPB) with natural gas, powdered coal or other fuels for increase in radiation heat is valid. An example through the action of C₃H₈ energy (propane) . C₃H₈ having eight H₈ in stead of two as with H₂O, increases the radiation energy output with (AEPB) synergism in sandstone. Note: Not all molecules are dissociated depending on the application of the AEPB!

The video shows no carbon in the beam's round area on fire brick. Carbon can be also store in other materials example above sandstone.

When Methane gas is burning alone with atmospheric air and no AEPB power on through the same air nozzle, carbon appeared over the area of the fire brick in the air flame's path.

Video #8 & photos of live tests of the FRIPRO^{c tm} non-vacuum chamber very high energy Atmospheric Electron Particle Beam Generator (AEPB)^{c tm}and its Atmospheric Electronic Flame^{c tm}

Video #8 Our Atmospheric air operated Electron Beam alone or when inserting most fossil fuels, example coal dust, natural gas, hydrogen even cardboard into its Electronic Flame^c tm ; little CO₂ or smoke is emitted. The energy output is considerably increased in the red, visible, and infra red spectrum through Synergism. When ever we have seen smoke generated outside of the Electronic Flame area in lab test the smoke would migrate back to the Flame column and disappears. Refer to Sample Test Charts #2 and #4 end of this page.

Webster's Synergism: The interaction of elements that when combined produce a total effect that is greater than the sum of the individual elements.

#8a Cardboard target fuel inserted 1+1 = SYNERGISM

Note: when the cardboard target fuel (Fluid Energy) is inserted in the Electronic Flame^c tm , the background of the room lights with high intensity--including amber, infra red, red, and heat radiating toward the ceiling. (Also seen in Video #8 above ). Not true in photo #8b.(right)

But when the cardboard target (Combustion Energy) is pulled out of the Electronic Flame^c tm (Electron Beam Energy) the room is dark to the camera. Refer #8b

Please note there is no damage or feeling of heat radiation energy to the human hand, even though it is right up against the Electronic Flame's^c tm Plume.

#8b 1 and 1= NO SYNERGISM

The cardboard flame alone is not enough to light up the room for the camera. When the Electronic Flame^c tm is without its target, seen in photo #8b with the burning cardboard. The Plume returns to a long vertical light radiation column.

Try examples: coal powder, water vapor, natural gas, hydrogen, or propane directed into our Electronic Flame^c tm in place of the cardboard target, together with or without atmospheric air!

Synergism is a given name describing multiple energy outputs to the AEPB Electron Particle Beam and its Electronic Flame^c tm .

Again review the Video #8 above to see this action in real time.

Webster's Synergism: The interaction of elements that when combined produce a total effect that is greater than the sum of the individual elements.

Though a very short video one can utilize the forward, backward, and stop motion play. ( left click and hold mouse on video play bar at bottom of video screen, move play a frame at a time). One can also notice that the CO₂from the glass blower's breath increases the Electronic flame's energy!

Certain types of Smoke stack emissions are reduce when the AEPB is properly applied. CLICK hyperlinks for video and sound photos below. Two more different methods are shown for cleaning stacked emissions of combustion type engines or boilers stacks.

on Atmospheric as fuel air and our copper nozzle only. Showing Electronic air Flame self starting,

Looking at the hyperlink video above, one can see how the cylinders can enable flue smoke (or other pollutants, soot, water vapor, coal dust) be directed into the cylinders and could converted to radiant energy. This energy pollution fuel can be salvage and utilized over again in many of our listed applications. REFER TO PAGE TWO. Use BACK to return.

One way to reduce the rising emissions of carbon dioxide and soot trapped in the atmosphere is to utilize the Atmospheric Electron Particle Beam Generator (AEPB)^{c TM} and its atmospheric Electronic Flame^{c TM}. It is estimated that 73 metric tons of Carbon Dioxide is admitted into our atmosphere annually by15 medium size autos! Refer to Photo # 9a.

Soot alone is responsible for 1.9 million deaths a year, and also is thinning the Artic Ice and melting the Himalayan-Tibetan glaciers water supplies. New regulations certainly would help, but significantly the continued research utilizing the AEPB Technology must be applied.

Another example, refer to #13, FRIPRO's generator when supplying 3000 watts RF at13.56 MHz. The reflected power to the RF generator is about 100 watts, showing great efficiency in the transfer of the output RF wattage into the atmosphere. Our entire AEPB generator system weighs only 125 pounds for maximum RF output of 5KW.

Modification to the pilot generator could permit direct operation on solar cells or other Direct Current generators.

Fripro Energy, LLC's team is under no allusions that our pilot prototype generators are the answer to all very large programs,with out the proper investment, now in progress.

The above AEPB's Electron Beam can be pulsed modulated, power level controled and frequency automatic or maual control. The AEPB system can be remotely or directly controled through the solid state generator's led indicator control panel.

Video #10 Boron Silicate glass blowing, melting, and shaping, video and sound pictures of lab test for heating, treating, blowing, and many other utilization of glass by the AEPB's Electronic Flame^{c tm} at over 2000 degrees F. Click on the icon on the photo below

Video #10 Video and sound pictures of lab test for heating, treating, blowing, melting, and shaping Boron Silicate glass and many other utilization of different glass by the AEPB's Electronic Flame^{c tm} at over 2000 degrees C. Be sure to view the very small Boron Silicate glass balls (about 1/16 inch in diameter floating in the atmosphere, near the end of the video.

Click on the red frame For Video #10A showing Boron Silicate Glass reaching the electrical current temperature conduction point of the glass.

This video is best observed in slow motion, or frame at a time, which this video lends its operation to.

Video #10 above A Boron Silicate glass blower can place his mouth directly on the three foot long boron silicate one inch OD pipe which is placed in the Electronic Flame^c tm

Shown in the above video, a glass blower is blowing through the glass tube with his own breath, without any harm to his person!

The demonstration was utilized with a 5000 watt (125 pound) generator, and cost about $1.00/hour at full power to operate.

There is no reasonable limit to the power, number of burner nozzles, or its targets enclosures or types.

(Refer to #16) photo of multiple burners operating off of one generator.

Careful study of the glass blowing of the boron silicate tube (half way through the video) one can see the small glass balls blown out of the 2000 Degrees F glass tube as they fly through the atmosphere of the room.

In the next hyperlink #12 a video shows Silicon Carbide being sprinkled on a white hot Boron Silicate glass inserted into a 5000 watt AEPB Electronic Flame^{c tm}

^{(SiO₂) plus Na₂O,
CaO
is the formula for Boron Silicate glass.}

#12 Hyperlink to a short video: CLICK hyperlink SILICON CARBIDE ADDED TO BOILING BORON SILICATE GLASS TUBE inside the

Electronic Flame^{c tm} . BE PATIENT WITH THE DOWNLOAD TIME The smoke in video #3A is coming from carbide dropping on the hot Boron Nitride sheath, but is absorbed by the electronic Flame.

This hyperlink shows the intensifying of the flame heating the two very high melting point glass and powders. The Silicon Carbide powder is fused to the glass rod.

Silicon Carbide powder can be placed inside the closed Boron silicate glass tube, or using powder feed units fed through the nozzle, for production in the AEPB Electronic Flame^c

Note: In chemistry when water vapor forms liquid water the process is exothermic. Refer to this video hyperlink #4 click Water MIST (with soap) sprayed into AEPB Electronic Flame One can see in the video the Electronic Flame's^c-tmplume outlined with a orange-red radiation, an indicator of the presence of hydrogen.

Our Atmospheric Electron Particle Beam (AEPB) furnishes a high powered fluid sheathed electron beam that gives us the reaction formula below! Water, Energy, and the CO₂If driven to disassociation terminates recombining with the H₄. The reaction continues in a chemical electrical rotation--giving us renewable clean Electronic Flame^c-tm energy! Refer to #6 and #6A below. If not pressed to dissociation with only the outer electron furnishing the recombination with its parent atom, may be enough energy generated to give us extra radiation energy on the Electro Magnetic Chart at infra red, red or UV radiation energy.

Most college chemistry students have worked with the natural gas formula oxygen combustion of CH₄ in the atmospheric oxygen O₂

The chemical formula above is demonstrated in every auto engine electric spark plug, pilot lighters used in kitchen gas stoves or home furnaces starters. The AEPB can do the same thing, only at a higher energy level depending on the design operation of the AEPB electron beam (eV) output. We also inform the reader that there are many AEPB nozzles, and each being operated differently, one being cold cathode the other being hot cathode. Others being inert gasses and others atmospheric air, compressed atmospheric air, or doped atmospheric air.

#13 Atmospheric Electron Particle Beam Nozzle did this to a fire brick when the compressed atmospheric air was increased to greater flow rates as one would encounter in powdered coal or oil air injection into the burner/nozzle system of boilers, blast furnaces or other heat energy applications.

The AEPB has the ability to augment the atmospheric electron particle beam with natural gas or other fuels such as powdered coal, for increased heat energy output with synergism.

When augmented together with the electrically operated AEPB Generator, one saves critical fuel supplies, stretching their use.

Our systems run at most any power required to be compatible with your energy requirements.

# Clean powered coal burns away with natural gas or propane with little or no stack flue emissions via our nozzles due to the AEPB's Synergism effect.

The AEPB stores the pollutants in many different ways or converts them to radiant or heat energy.

Further radiation test shows no X rays emitted from operation system.

Do not be led into a false assumption,the size of your operation must be matched by power levels increased in our systems outputs and volumes of fuel required. However there is a large trade off in fuel cost reduction.

Video #11 Restaurant cooking and Boiler type heating with a metal pot or oven. No electric shock or RF burn from boiler, pot, or cooking utensils (VIDEO and Sound). Ceramic target oven boiler isolates the electrons from the metal pan! RF Radiation is confined to the generator, transformer and nozzles!

VIDEO #11 (VIDEO and Sound) Boiler heating or restaurant cooking with a metal pot or oven. No electric shock, or RF burn from boiler, pot, or cooking utensils. Toggle full screen for best view

VIDEO #12 Possible CARBON STORAGE IN SAND (Click on photo above) Radio Frequency driven AEPB directed into a ceramic cylinder generates radiant heat energy (red, infra red, and UV) with little if any emissions, due to utilization of atmospheric air water vapor, which resonates at the AEPB RF frequency when directed at a ceramic target.

When other elements are so combined, due to synergism, the added fuel from the atmosphere, or through other fuel injection methods, the output energy is greater then the electrical input during high efficiency applications. (E1 energy unit + E2 energy unit = Synergystism

The energy can be used in boiler heating, blast furnaces, in green house pipe heating, piped compressed hot air heating systems. It can be operated from a wind turbine three phase AC generator, or from solar arrays or the grid power.

In conjunction with compressed air as a fuel where hot compressed air is the driving force for turbine mechanics which allows storage and/or generates electrical power.

There also is no radio frequency radiation from our Generator's system!

Photo #13 Fire brick can be liquefied to lava by increasing the air or compressed air flow rate.

Video Hyperlink # 14 Two of the above 2200 degrees F melting point Fire bricks Photo #13 can also be welded with an air fueled AEPB. Refer to a very short demo video:

CLICK hyperlink # 14 AEPB FIRE BRICKS CERAMIC WELDING ON A MOVING TABLE VIDEO (wait for short download time)

Be sure you have downloaded (MS Windows Media Player) to play this important ceramic welding video.

# 14 The left frame hyperlink shows that a wall of fire bricks can be welded by the referenced non- vacuum electron beam (AEPB) instead of using mortar.

(Not limited to fire brick)

The above vaporizing of the fire brick is one example of what a 5KW AEPB can do to a fire brick or other higher melting point ceramics

(Refer also to #14 left) The weld is strengthen via a special treatment to prevent glass (lava) brittleness--however retains its firebrick strength.

Systems are not limited to 5 KW!

#16 Also multiple nozzles can form a burner as shown in the above photo utilizing the same fire bricks. Power can be increased to what ever value is required. The photo in #16 is not limited to a single array, but can be connected in X and Y designs to produce larger arrays for very large energy producing systems. Remember that the arrays can and do run on any electrical energy source and compressed air and/or other fluids .

With respect to solar and wind generators the energy produced can not currently be stored effectively as snow, ice, sun and wind slows down or stops energy output; although, we have been experimenting with compressed air storage. Our AEPB runs on compressed air!

The amazing point about our nozzle system is the nozzle is near room temperature or lower and the output Electronic Flame or AEPB temperature on a target can be in the thousands of degrees F !

FRIPRO has experimented with higher powered AEPB generators and a 5 to 7 foot AEPB Electronic Flame into the atmosphere with compressed air at a minimum fed into our high powered nozzles for high energy applications. Stored compressed air warmed through our AEPB system can be used as piped hot air heating systems also for Greenhouses for Growers, Apartments and buildings heated in this manner.

The compressed air, is stored from electrical generation from Solar, Wind or Electrical utility generators and imputed to compressors in high sun light and wind operation-thus stored live in tanks for later peak power usage by power utilities etc. The key to compressed air storage for future use is in AEPB's or direct compressor applications.

The AEPB energy can also be stored in ceramics (as the atmospheric air is always there, refer to the fire bricks above). Therefore the three sources of clean renewable energy (Solar, Wind, and AEPB) can work together!

A more sophisticated Ceramic storage Device^c can store the very hot ceramic for later use and the AEPB nozzles output can utilize the stored compressed air output to operate as a heater and energy output for utilizing the stores energy to operate needed additional generators that may be off line because the load is not there. Mega watt solar arrays can also utilized the same process for storing solar energy when the array's output is not producing power. (Night effect)

# 18 CLICK hyperlink Excellent video ceramic tube heating in AEPB's Electronic Flame^c tm Note: Use the left and right keyboard arrows to control stop motion, back and forward frame at a time, after the down load of the video above.

Intense heating of three foot, one inch ID Ceramic tube (Aluminum Oxide-Melting Point over 3000 Degrees F showing heating capability of the AEPB's 2500 watts directed at the target. Note: No heated flame with out a target!

This is one of several methods the AEPB and its Electronic Flame^c tm can contribute to reduction of flue gases, also Refer to #9a above.

Note: Electronic Flame^c tm emission at the top of the cylinder and the fact that the cylinder is not heating--only through radiant transmission.

# 20 The electron particle beam and its hyperlink Electronic Flame^c tm^(Video) through Laminar Flow can be the basis for spectrum analysis of injected elements and molecules when installed in a proper measuring device.

The electron particle beam and its Electronic Flame^c tmcan incinerate tobacco, sugar and other dry organic materials extracting their intrinsic energy through Synergism. Smoke is considerably reduced

CLICK hyperlink Electronic Flame^c tm^. The Electronic Flame^c tm ,when directed vertically

into the atmosphere, is a non-oxidizing flame; the opposite of a fossil fuel oxidation flame and little emissions into the atmosphere.

It makes use of the atmosphere itself for energy including water vapor. Note: With respect to measuring efficiency of this Electronic Flame^c tm .

There is no measurable radiate heat in the raw flame into the atmosphere. The efficiency at the red infra-red spectrum with respect to input electrical power is near 0%.

Once a target or fluid is introduced--

that all changes. Refer to Video #1 above.

#22 Our RFIC Transformer and nozzle system can be connected to any zero to full output five, ten or fifteen thousand watts 13.56 MHz radio frequency or plasma RF generators, as a Radio Frequency Dummy load. It permits tuning from zero to maximum power at the desired frequency.

There is no requirement for your system's connection until turnover to your operating conditions in your, station, plant or Lab. It also enables your RF generator or transmitter in the pre-subscribed band to operate as outlined on this web site for research and development or production requirement via a standard coaxial cable.

Enlargement analysis clicking on the photo #22 can be studied and the viewer can clearly see the blue color of Cherenkov radiation of the electron particle beam in the atmosphere. Do not mistake this atmospheric operated non-vacuum enclosure electron beam, for a plasma beam.

Our AEPB generator's RFIC Nozzle heads in a pre-subscribed band and output power, operate as outlined on this web site for research, development, or production requirements for renewable energy via a standard coaxial cable. All applications can be computerized controlled by most computers, with the proper software. Power input can be many different sources. System weight for a 5KW system is about 129 pounds. 10KW 200# approx. Others in higher wattage generators vary to design requirements.

This new technology, the Electron Particle Beam Generator directed into the atmosphere with out a vacuum chamber, can be purchase from FRIPRO Energy, LLC. The equipment and user license are available. For scheduling, price or rates refer to

FRIPRO Energy, LLC is interested in licensing its technology for specific uses and/or specific areas of the world. If you are interested in licensing our technology, other options (Including investment) or joint research projects, may be available. page_2

The Plant Growers industry should not over look its great break through for growing vegetables and other plants in year around greenhouses, even a head start on the growing season wiith our Plant Plasma Solution the key that unlocks the Plant's Plasma Cell Membrane and lets the three main soil nutrients into the cells.

Refer to the CHART #23! PLANT PLASMA SOLUTION INVENTION AND ITS GENERATOR. It does work with AEPB type technology and keep in mind the main issue here IS ENERGY.