Plant's cell root Plasma Membrane activator (Plant Plasma Solution), Amazing growth of fruit, plants, FLOWERS 

with Atmospheric cleaning of CO2\

                                        PLANT PLASMA SOLUTION   Page 1

                Metro Toledo OHIO USA (Maumee & Springfield Township) Photo to the Marine Safety Office in Toledo

                  FRIPRO Energy, LLC of (Maumee) and (Kingsport Tn.)

Nearly dead plants, trees, flowers, and seedlings can be revived to great plant       Press F5 Key         

                   Contact either or both  by phone 1 419 765 1760 Kingsport Tn.

anksh翻译   對於語音和文字    переводить    TRADUCTOR  --مترجم                       

Copy and Paste in Translate for voice and text in any language.  

Click on Translate then copy from the new translation and paste it where ever

you wish to use English and another language at the same time,  in--say e mail 

or other printed copy.

                  Do the same with any text on this web site Manuscript  Page 1                      

Plant enhancer opens the Plant's root Plasma Membrane, letting  water, and nutrients in!

                                           Nearly dead plants, trees, flowers, and seedlings can be revived to great plants.

                                             (Click on links below: Or continue down the page)

                                               TABLE OF CONTENTS: Further Plant Plasma information

page 2 2 plant plasma.htm

page 3 Comparing Flowers, Plants and Trees


TIPS WITH (Plant Plasma Solution TmC (PPS) Instead of Fertilizer or Tap water (Tomato seed Planted in sand and dried

out from the sun. Plant Plasma Solution revived in one hour

page 5 Page_5 fripro energy applications and references

page 6

page 7 DC Atmospheric Electron Beam Molecular Dissociation of Liquids (To be supplied later) Page in design

page 8 DC Atmospheric Electron Beam Molecular Chemical Generator (Data to be supplied later) Page in design

To: spotlighted videos, photos or other information:  COPY AND PASTE English INSIDE 


                                                                  翻译     переводить    TRADUCTOR--مترجم  Translate  


              Refresh with keyboard's (F 5) often for new data, and F11 key removes top page menu

Significant advances with Plant Growth Liquids PPS*(as a plant cell activator in low nutrient soils) utilizing no irrigation water, or added fertilizer but the PPS* liquid produced and added to plants is generated and distributed by many means.

Plant Plasma Solution maintains its concentration of ions (NO3-, No2- Cu ) in solution and as that solution evaporates the concentration of the ions per cubic centimeter is more concentrated. Nearly dead plants, trees etc can be revived into great plants!

Watering only dilutes the Plant Plasma Solutions Ions that the plant so needs to open the Plants Plasma's Membranes to permit water and nutrient to climb up the root ball and stalks (from the soil) for a healthier and more productive plants. 

The top soil should be protected from the sun's evaporation so plant and top soil should be spay misted as needed.

Testimonial from Plant Plasma Solution Users:

Sent: 12/19/2012 9:09:05 P.M. Eastern Standard Time
I just had a plant revival in my home! All I did was skeptically pour some PPS on my sagging dying houseplants and it was the most amazing thing I 've ever seen. They ALL not only "perked up", they POURED OVER the pots with lush green like I 've never seen! Looked more beautiful than I ever bought from the greenhouse. Flowers bloomed like crazy. I am stunned!

Robin S. 

Kingsport, TN 

              Tuesday, July 2, 2012                                 

If you have a yellowing or dieing flower, tree or vegetable (even seedlings) planted, try treating it with 

Plant Plasma Solution (PPS) your soil may be starving.

                          PPS should return them to health in most cases within in week or two,

 ready for transplanting outside. You need not add fertilizer, or tap water, 

not even after it is transplanted!

                          Use our phone contact  if the above Buy Now can not be used. 

                          To order PPS1-423-765-1760 if in use please call back or leave you contact.

Photo can also be enlarge with the CTRL KEY AND THE + OR - KEY,, use you arrow keys to move position within enlarged photo.  

Plant Plasma Solution electrically generated from tap water (generates stable negative Nitrate and Nitrite ions plus Copper positive ions )Tm C pH 7 +. All are very stable in solution and are not considered a fertilizer

Do not rule out PPSTmC as an enrichment of many different forms of fertilizer! Also works well in poor soil nutrient.  The solution is not caustic to humans or animals. May save water and fertilizer in growing plants.  But most important the very healthy plants help remove pollutants (CO2) in the earths Atmosphere.

We have put into practice two technologies that disassociate CO2 gas emissions (the AEPB running on CO2, and the Plant Plasma generator generating NO3- and NO2- ions and copper in solution that enables Plants removals of CO2 and other pollutions from the atmosphere also for enhancing Plant growth life and generation of the Oxygen and nitrogen into the Earth's atmosphere. Plant plasma measurements indicate there is zero ammonia in this solution so there is no chance of explosions.

We all know that plants take in CO2 and changes it to Oxygen and Nitrogen gas. Adding to the Atmosphere.

Buy Now Plant Plasma Solution (concentrate) Option 1 includes packing and shipping.

Special price ordered by the gallon of option #1, plus shipping, packing and handling by weight. State the number of Gallons

Vendors are welcome


FOUR OZ. TEST JAR PLANT PLASMA SOLUTION CONCENTRATEAT 200 PPM OF NO3- and NO2- ions and copper in solution tm c 

Photo above shows the color test strips that indicate contents of milligrams per liter (parts per PPM) or grams per liter. No matter what size. 

Test strips are available at any aquarium store or even Meyer, Wallmark and other like stores  etc.


 You need not add fertilizer but it will not hurt the plant if you do so.

                 Use our phone contact if the above Buy Now can not be used to order PPS

Non-Root PPS injected Rose June 2011 More information on growth and size of This Knock Out Rose Bush at:

Photo June 9, 2013  Injected knock-out-rose/root compared with non injected rose above (Photo June 2011)


Refresh with keyboard's (F 5) often for new data, and F11 key removes top page menu

  Significant advance with Plant growth Liquids PPS* refer to the handsome rose above (as a plant cell activator in low nutrient soils) utilizing no tap or irrigation water, or added fertilizer but the PPS* or the natural rain)! 

Tap or brackish water  Dissociation molecular CHEMICAL GENERATOR              Tuesday, July 2, 2013                                                                                      

 Refresh pages often Pressing F5.  Videos, hyperlinks, are designed for MS IE 8.0+ BROWSER, wide screen Windows 7 Professional.

  翻译     переводить    TRADUCTOR--مترجم   COPY AND paste in Translate 


April 15, 2012 (left photo) Tomato **seed germinated in egg carton and Sand, fed daily only Plant Plasma Solution, no fertilizers or water, then planted outdoors May 20, 2012 in low nutrient soils. Refer to same plant's later photo Aug.1, 2012  below:

     Photo Aug 1, 2012a Only Plant Plasma Solution (PPS) fed daily

Photo Aug 1, 2012a.  Rutgers Tomato plant** transferred outside was germinated in sand, no fertilizers or toxic sprays. Only Plant Plasma Solution (PPS) fed daily keeping the sand moist. Refer to photo April 15, 2012 left small egg carton April 15, 2012 .  

Photo Aug 1, 2012a Plant now six feet tall. 15 one to three inch Tomato fruits are growing fast on Plant Plasma Solution treated plant. Untreated plants (in the background) have only blossoms and lots of leaves even though also reaching over six foot tall. 

Photo Aug. 28, 2012 Latest main section of Rutgers tomato plant ( original above sand germinated plant on April 15, 2012)

Photo Aug. 28, 2012 Latest main section of Rutgers tomato plant. Click on any tomato for enlargement (More then one enlargement is permitted, use BACK to get to original size. ( Original above,  sand germinated plant on April 15, 2012)

Proof that Plant Plasma treated tomatoes plants in low nutrient soil allows for Fruit to Multiply (20+ Tomatoes in this photo). This is true as the untreated plants are all leaves in the same time frame and soil. The question we ask do you want high plant leave only growth--or do you want Tomatoes?                                                                      

Photo April 15, 2012



Photo Sept. 24, 2012 


Original plant seed germinated in sand (refer above to egg carton Photo Sept. 24, 2012) The top seedling  happens to be the seedling (in sandy soil) that fell over and was revived (by Plant Plasma) in the egg carton (in one hour) and then planted outside. It developed into the grape cluster shown in left photo

This plant Rutgers tomato is now growing higher than the first germinated seedling in sandy soil (above April 15, 2012 (left photo) More proof that Plant Plasma Solution makes more flowers than leaves and also makes clusters as shown above. This photo can be enlarged greatly by clicking on the photo.

OCT. 9, 2012 GRAPE LIKE Clusters of nine tomatoes growing with Plant Plasma Solution treatment 8 Oz. as needed. This was grown from the seed germination in sand in an egg carton, whereas the small egg carton plant fell over (Refer to top of this page for photo) from the sun and Plant Plasma Solution was applied and in one hour the plant went back to normal, 

Now that plant is over 12 feet high with many tomatoes an the grape cluster above shown above is after root ball injection of about 100 ppm of Plant Plasma Solution! (No3- and NO2- negative ions in solution!)

    The same action was duplicated in roses buds in both test in Kingsport TN and Maumee Ohio.

AUG, 1, 2013 When viewing the multiple rose bud photo here (a second blooming this year)   the same action (after root injection a month before) causes the roses buds to multiply on a single branch just as seen in the grape tomatoes clusters in the above photo Oct. 9,2012 after its root ball was injection with about 100 ppm of plant plasma solution! 

Sizes of both roses and tomatoes were the same as if there were only one tomato each on the vine or bush. (The above photo can be enlarged many times, just click on the photo)

Can you imagine what that could do to the food supply? There were multiple growths of the same clusters on the six foot tall rose bush!


PHOTO March 29, 2013 Click on the above root photo (any spot} for enlargement, will enlarge several times.

Left and right root system pulled out of the soil March 29, 2013. Left root system treated with Plant Plasma Solution only--no water or fertilizer, refer to Photo Sept. 24, 2012). Loads of tomatoes even in clumps grape like refer to Photo Sept. 24, 2012 above.

Right side Photo Sept. 24, 2012 root system treated with water only. (both plants planted same time in same soil-no fertilizer. Right side TOMATO  Plant had few tomatoes but 14 foot tall and mostly green leaves.


Photo Aug. 28, 2012 Left plant treated with Plant Plasma Solution no fertilizers, nor water. The right plant planted two months before the left plant, in the same soil, has been treated with fresh water, even though the temperatures have reached 105 degrees F. 

Note: The left plant is the same tomato plant type as the right photo but the left has been treated with Plant Plasma Solution and the right has not. They are planted in the same soil. The right plant is mostly leaves 12 feet high and the left treated plant four feet high is developing fruit (tomato) quickly with far less leaves.

The sand loam soil therefore qualifies as low in nutrient soil. Plant Plasma Solution poured on plant's base about a pint per day.        Push F11 on your keyboard for full view of the treated plant. Use pointer to enlarge and again, then to back

                                 Temperature 76 Degrees F to Over 105 F all of July 2012. Some rain

Photo can also be enlarge with the CTRL KEY AND THE + OR - KEY,, use you arrow keys to move position within enlarged photo.  

Actual photos of growing Rose Bushes for four years ( photo 2012 will be supply later missing! Plants treated in the years 2010, and not treated 2011, and treated 2012. and 2013

Top latest photo May 15, 2013 also Photo #4a May 15, 2012 Below 

The three sets of photos in the year 2010, 2011, now 2013 should be compared with each other to see the amazing growth that Plant Plasma SolutionTM C treatment. (Plant Plasma Solution for growth was used though out 2010) but none was used in 2011,but again applied in 2012 to show the difference in growth over three years.

In all four years no fertilizer or direct watering other than rain, during the plant tests that, were conducted outside in the weather.

NOTE FOR BEST VIEW OF THE ALL PHOTOS COMPARED FROM 2010 TO 2013 same rose bush at about the same time for four years

SIDE BY SIDE USING ctrl key AND + if you wish to enlarge photos etc. Be sure to use F5 or refresh your new download of this site.

              #1 Photo APRIL 2, 2010 LEFT, PPS TREATMENT           PHOTO #1A, APRIL 2, 2011 RIGHT PHOTO #1PHOTO #1B, APRIL 2, 2012, TREATMENT with PPS, Since March 21,A (NO PPS TREATMENT)


 Photo 1C April 21, 2013 left warmer weather but below freezing at nights. Three root injections made at 200ppm of Plant Plasma Solution directly into the main large root.

Photo 2013 missing, Error





Compare the three photos here: Left, APRIL 2, 2010 to 2013 see what Plant Plasma Solution TM C  


Photo #4 Right May 29, 2010.

There is no doubt that the originator of this Knock Out Rose Bush did not have in mind these 150 large nearly three inch blossoms that we are showing in the above photo #4.

Knock Out Rose

A 2000 AARS Winner, The Knock Out® rose has broken all records for sales of a new rose and is the most widely sold rose in North America. Knock Out roses were developed by William Radler, a Wisconsin botanist who was looking for a hardy, disease-resistant rose bush. Knock Out roses are a shrub rose bush that grows to about 3 feet in height and stays in a relatively tidy mound. Proper care will keep this rose bush blooming late into the fall

  翻译     переводить    TRADUCTOR--مترجم  Translate 

Our testing showed that Plant Plasma Solution tm does indeed help the quiescent winter phase of Bill Radler's Knock Out roses to be accelerated into lush growth--perhaps more so then the above breeders intentions. Also double the growth and early starting from the quiescent period of only 2.5 months outdoors.

Above Photo #2 APRIL 10, 2010 (added Concentrated Plant Plasma Solution TmC (PPS) 2 Oz.) No fertilizer

Above Photo #2A APRIL 10, 2011 no Plant Plasma Solution TmC (PPS) added or fertilizer. Compare to above photo #1 one year ago-but the

growth is twice its size and not fertilizers or PPGS added!



Note: Growing thru cold 29 to 40 degrees F April weather (Zone #6)

Photo #3 May 6, 2010 treated (root treatment) with Normal Plant Plasma Solution TmC (PPS)

To see the full blowups, press F11 key, use F11 key again to bring the menu view back-----For a more dramatic view: photos below can be enlarged by holding down the keyboard's Control Key and + key. Back' use -- key



Refer to Page 2 Plant Plasma Solution TmC (PPS) for testing and reference backup data, from commercial lab referenced published testing reports


Or please continue for test made in 2010-2011 below:

No fertilizer was utilized! only strong Plant Plasma Solution TmC (PPS) into the root base and poured on in weaker amounts weekly. Photo #4 was taken May 29, 2010. Fantastic growth 150 blooms PRIOR TO CUTTING ALL BLOOMS OFF (arborday zone #6) (Note: these blooms are single flowers only refer to Photo #6 for second generation showing multiple blooms! (Plant Plasma Solution TmC (PPS) compared to dormant plant photo #1 above. and untreated photo #4a below. No fertilizer of any kind used!

Photo #4 June 2, 2011 One year later. The untreated rose bush is much larger double the growth in on growing season, then the year 2010 (due to last years growth) but has no where close to the number of large roses as in above Photo #4 2010. This year June 2, 2011 was not treated with Plant Plasma Solution TmC (PPS)!

Photo #4a May 15 ,2012 treated two weeks ago with root injection of Plant Plasma Solution, there are over 200 three to four inch across roses, as measured in the next Photo 4b. Note Photos 4a and 4b are very high resolutions so one can click on the photo and use the up down right left key to move the photo when in very high enlargement (there are three position in each of these photos for close up study. Be sure to refresh this page with F5 and also using F11 will remove the top of the page menu so that the enlarged photos cane be better viewed.

Photo 4b Shows a four inch across rose(Over 200 of such three to four inch roses, mostly four inch across. and also an additional bud on the same branch! May 15, 2012. Plant Plasma solution is really doing an excellent job, compared with last year 2011 Photo 4a

Photo 4c Friday May 18, 2012 Shows the above Rose bush where three roses have clumped together, this usually does not start till later in the year very healthily on Plant Plasma Solution. Each flower is four inches across.

Photo 4D Sunday May 10 2013 (four years after first planting and treating) cool days and nights. Three injections in main root 100ppm PLANT PLASMA SOLUTION (Click F11 key for full page view.

Also our Energy efficient Atmospheric non-nuclear Electron Particle Beam (AEPB) and it generated Electronic Flame is described in detail at our home page at 


Not treated Knock Out Rose bush at distant location 2010

Photo 4a June 30, 2010. Untreated Knock Rose Bush flowers are much smaller and plant does not seem as healthy bush is about the same size and no where near the multiple clumps or size of the buds as in photo above in #4? In fact with out PPS treatement the Rose bush above stayes about the same for 2010,2011, and 2012!

For best full view (press F11 on your keyboard)


We cut all the 145 rose flowers off as shown in photo #5. (Five flowers left on vine). Then we treated the roots system a concentrated Plant Plasmac tm solution on June 17, 2010. Two weeks prior we poured diluted solution on the plant and its base and it has started new leave growth (refer to the left side of the Photo #5). It is expected that we will obtain a second generation set of buds and thus flowers. We may even be able to go a third or forth time before winter. (In growing zone #6)

Below Photo 6a same rose bush (Untreated one year later) 10/17/2011 Note that all of the roses are on the left side even though there was not treatment in 2011 ( a couple on the right side! also NOTE THE GROWTH FACTOR!

Photo 6 A October 24, 2011. With no Plant Plasma Solution TmC (PPS) no treatment in 2011 shows that there not only were no blossoms on the right side of the plant, also many flowers and more blossoms of the roses on the left side. Also the growth was made in 2010 when it was treated with Plant Plasma Solution TmC (PPS). (The rose bush seems to have a memory after the 2010 treatment of the left side root.

Photo 7, Aug 7, 2010 (THIRD GENERATION) (always the spent flower was cut off)

Note: height of the plant over a foot growth since photo #6! July 10th 2010 (compare to the yellow band on the vertical stick) and all flower buds that were not a whole flower were cut off. Plant Plasma Solution TmC (PPS) injected into the root system with above photo #5

Below Aug 7th 2011 no treatment

Aug.7th 2011 Photo compared with the above in Aug 7, 2010 no Plant Plasma Solution TmC (PPS) Treatment

Growth from the year before but only one one inch flower!!!




Technical Statement Below, on our products.

Read statement below then view photos of plants grown through 2010 and 2012 (On Plant Plasma Solution TmC (PPS) Solution)

In Plant Plasma Solution TmC (PPS) certain important ions are held in solution. The PPSTMC is generated by an electron beam directed into a solution. The ions stored in solution remains in the water solution and has a good shelf life.

This solution when treating plants acts as a key to unlock the Plant's Plasma's Membrane so as to let other nutrient's into the plant's root and system's molecule's membranes. There is no need to add other elements or compounds. It supports other soil nutrients and insect repellents.

There is no solid, liquid, powder or other fertilizer added to the Plant Plasma Solution TmC (PPS). There is no damage to the plants. It is fed to the plants root area by many different processes as to the likes of the Grower, even injection, or simply water ring the plant's base root system. It can also be sprayed on the plants leaves, for many reasons.


This new invention provides for less production cost, different or higher efficiency delivery methods, solution concentrate, and longer shelf life and above all can give growers and seeds extra early time for planting extending the growers seasons (both in/out doors) several days or weeks into Winter or Fall. Why leave a greenhouse closed for the winter, if it can be used for more food or flowers. And our PPGS site generator may help in part to heat the greenhouse in cool or colder weather.

We have tested in real plants at different outdoor locations our new solution treatment to plants as shown below entering a three year growing cycle. We also have recorded tests that have been made over twenty five years and maintain the growing data recorded in photos and text.

Fripro Energy, LLC's Plant Plasma Solution TmC (PPS) can be generated on site or its solution delivered by other means. It also may have a very simple use in Hydro-phonic gardening, even sand within certain conditions of the semi-desert regions! .

The marketing cost per gallon is to be determine by supply, demand, bottling, labeling and delivery. Even with our prototypes we can generate a gallon of Plant Plasma Solution TmC (PPS) Growth Solution in three minutes at two KWH less setup time at an electrical cost of 5.5 cents per KW hour plus tap or even brackish water cost.

The PPGS can also be bottled and labeled and sold for direct application on site for use with the plants and seeds themselves.

The reader must not forget the application of Solar Cells and Wind generators as a second electrical power source where the grid is not available to operate our generator. Our generator runs on DC or AC 120-220 volts power lending its use to eliminating the solar cell inverter. So also true for the high cost power inverters for our generator which cuts our production marketing cost of the PPGS generator its self!


Just think what it means to the Solar Cell array Business if (PPGS) are used by Growers in Greenhouses or outside where the electrical grid is not available----- NO INVERTERS!


Photo 9 below

Photo #9 July 5 2010 above SHOWS THAT IF YOU LOOK AT a blow up (control Plus keys) PHOTO above, YOU WILL SEE IN THE LOWER RIGHT QUADRANT A CLIPPED END OF THE FORMER THREE INCH FLOWER (ROSE) AND AT THE UPPER LEFT WHERE MY HAND IS YOU CAN SEE MANY BUDS and a flower GROWING. If this follows the path it seems to be, then each (or many) clipped rose then regenerates multiple roses on Plant Plasma Solution TmC (PPS) (But smaller in diameter but very beautiful) .

Photo #10 shows the rose bush in a close up of new leafs and buds of the second recovery of the Knock Rose Bush. Many new buds are visible if one looks closely. June 24, 2010 (Control Key + will enlarge photo)


Photo #10 June 26, 2010 shows the first rose of the second generation of treatment with Plant Plasma Solution TmC (PPS) Knock Out rose second generation seem smaller the then roses pictured in Photo #4


Photo #11 June 26, 2010 many buds in its second generation of Plant Plasma Solution TmC (PPS) treatment.

The above buds number five off of one stem. Many other multiple buds are now growing some intended by the Breeders. (As time of growth goes on each former three inch rose flower that was cut off there is developed many five bud flower growth as shown above photo #5a.

With the creation of The Knock Out® Rose, even after cutting off the 150 flowers (blooms) there seem to be in the second generation, new multiple bud growth coming directly out of some stalks! The whole plant is being treated with 30 ppm of sprayed on the plant (Like rain) with Plant Plasma Solution TmC (PPS)c tm solution or poured on the root base are of the plant, daily or as needed.

June 30 2010 Photos 12 below

Photo #12 SEEMS IN FULL BLOOM BUT MEASURED AGAINST A 3/4 INCH GREEN STICK (SECOND GENERATION THIS YEAR 2010 June 30) It is as the inventor of the plant intended


Photo #13 below July 31, 2010


Photo #13 No fertilizer on Plant Plasma Solution TmC (PPS) applied on July 31 2010 second generation. An another view left, of our Knock Out rose second generation seem smaller the then roses pictured in Photo #4. A beautiful rose grown only on Plant Plasma Solution TmC (PPS) Looks different than the Knock Out Rose inventor intended?

Photo #14

Photos #14,#15,16 Sept. 6, 2010 SHOWS THE LATEST VIEW (Third Generation seed pods of the second generation cut off) OF THE KNOCKOUT ROSE BUSH COMPARED PHOTO #3.

Note the yellow tape on the green pole, this is the growth (SINCE Photo #3 May 6, 2010)




Third Generation seed pods of the second generation cut off. Knock Out Rose bush treated with Plant Plasma Solution TmC (PPS) Photo,#14, 15 and 16 Sept 6, 2010 showing the growth from the yellow marker tape on the green stick from earlier photos


Photo#16A LATEST CLOSE UP PHOTO OF THREE KNOCK OUT Roses (Third Generation) treated with Plant Plasma Solution TmC (PPS), Sept 17, 2010

Photo #17 September 7,2010 a untreated Knock Out rose bush growing about ten miles from our test installation has not grown much since it came out of dormancy on Feb.2, 2010. The same time as our photo #1 above test did. This plant (growing in full sun) has not been treated other than the natural rain/weather in Toledo Ohio USA. The size has not changed much and not more them four or five flowers (yellow knock out roses) at any one time an as you can see in the close up the seed pods are still there. (Expand the photo with control plus keys to view) and or use F11.



Photo 18B Close-up of the LAST ROSE OF SUMMER Nov 19,2010

One must take notice that Feb 20, 2010 the rose bush came out of its winter dormancy, after Plant Plasma Solution TmC (PPS) treatment. (refer to Photo #1 above). If this Rose bush holds onto it green leaves and the LAST ROSE OF SUMMER, it means the in the northern freezing climate ( at both ends of the calendar the rose bush was growing-- this is nine and a half months live and two and one half months in winter dormancy. No regular fertilizer was used other that Plant Plasma Solution TmC (PPS). Also the Rose bush double in size and height.

December 27, 2011. Outside temperature 31 degrees F and snowing yet green stalks and shoots are every where . Plant was not treated in 2011 with nothing. Treated only AS PHOTO #1, 2010 above.  

The root system was examined and the new roots growing as if the Rose bush seems to have been render hardy from the 2010 Plant Plasma Growth Solution (PPGS) injection treatment.

Photo 19 Mushroom first treatment October 15, 2010 below

Photo 25 September 2010 has been injected two weeks in arow by {Plant PLASMA GROWTH Solution) Nearly one foot long half above ground. After several days there was no change in growth nor death of the mushroom! But look at it today October 29th 2010!

Stored for test

Photo #20 inside ball mushroom above Nov. 1, 2010


Our Plant Plasma Solution TmC (PPS) is very acceptable to passing through the Plant Plasma Solution TmC (PPS) Membrane with out damage to any fertilizer, or microbes and allows for the concentration-dependent absorption of ions which may serve to retain a significant proportion of an otherwise highly mobile form of an essential plant nutrient.

Root ion uptake, is quick to respond to our Plant Plasma Solution TmC (PPS). In fact test show that buds, leaf, flowers, and fruits vegetables are accelerated in growth. The Nitrogen ion in solution is the key that un-locks the Plant's cell Plasma Membrane to take in the three main nutrients in the soil. Refer to further info page two, Page 2 Plant Plasma Solution TmC (PPS)


PHOTO # 23a Second generation of a small Poinsettias gift plant about one foot across (note all new growth). It has lost most of its red  

leaves and the Plant Plasma solution has been applied since December 25, 2012. The current date of the above photo is Jan 27, 2013. 

This will be a much larger red leaved plant for next Christmas 2013!  We will continue to show its growth  along the way. 

Plant Plasma Solution allows Poinsettia Plants to grow larger year after year, as long as the Plant Plasma solution is applied,--

No fertilizer or clear water is permitted! Refer to Page #3 in the TABLE OF CONTENTS above.

All green leaves will turn red in the dark the last month before Christmas. Plant growth should be much larger!

(Photo can be enlarged, click on photo Plant is very healthy!)

PHOTO #23c Transplanted to a larger pot.

The world wide interest in our four renewable energy products, and increasingly more interest in the Plant Plasma Solution

and its molecular generator, as indicated by our response provided daily by and independent firm.

Patent Notes  翻译     переводить    TRADUCTOR--مترجم  Translate 

FRIPRO Energy, LLC our jet nozzles, generators, molecular generator, liquid dissociation or processes are protected by Pending patents, International patents/copyright, regulations or trademark rules. We do not allow any third party without FRIPRO Energy, LLC consent, to create, produce, or offer any items that are covered and protected by these patents, pending patents, copyrights or trademarks. We reserve the right to enforce our intellectual property rights via legal action and will direct such proceedings against unauthorized manufacturers and their buyers to achieve a cease and desist of such activities in addition to claiming financial damages. We will not hesitate to aim for full redemption possible under the law.

The Fripro Plant Plasma Solution TmC (PPS)TmC is produced with a proprietary manufacturing process that can be applied by various means and is able to pass through the plant's root cell Plasma Membrane with out damage, permitting more water and Nutrients to pass into the plant cells in less time and volume! (It opens the DOORWAY to water and nutrients for the plant)

It does not limit any fertilizer or microbe action and allows for the concentration-dependent absorption of negative nitrogen ions which serves to retain a significant proportion of an otherwise highly mobile form of an essential plant nutrients. Regular methods of fertilization and watering can still be used, but possibly in lesser amounts or different types that are Energy Efficient generated by alternative energy sources.

Agriculture Products produced by commercial companies who manufacture Pest Management control for example: Root Disease Control, Foliar Disease Control, or Energy Efficient fertilizers are not affected by PPS applications. Click here to look up your hardiness.

Temporary photo of three different concentrations of PPS 

          (be sure to refresh) F5 key

1. Light color reds top left. (35 ppm) Good for starter plants or seedlings once a day )

     do not over wet the soil. Keep in good sun area. ( They will grow even in sand)

2. 200 ppm heavier red at top right and used in larger plants into the root itself or it root  ball. 

                                    Drip feeding under ground may be a good way to operate.

3. 1000 ppm the higher very much darker colors at lower right. Use for direct injection into

 large trees, bushes etc and even use for dilution to a lower level by adding to water. 

The higher ppm the more it is priced. The goal at your facility is to test our solution at a lab

not to use it for planting (at this time) by diluting it back to 30-40 ppm that plants like, weekly it is good to 

pour directly into the root  ball at the 100 + ppm as it takes months to prove what we have

already done pictured on this web site for many years testing.

         Never use fertilizer or tap (hose) water as the plant plasma is enough (no matter how good or bad

 the soil is) at 30 to 40 ppm to keep the plant in good healthy growth. Every three weeks a stronger 

solution injected into the root ball or the root its self, even when one starts the first planting out side. 


Inside seedling plants the 30 to 40 ppm is fine, as long as the plant soil does not dry out.

If the plant inside or outside does fall over (to dry) pour a little 30 to 40 ppm on the soil near

the stalk. It will recover fast. Even plant that look dead mayy recover!

Note if you have already started your plant of other fertilizers discontinue and continue to add water till the  fertilizer is

gone as the PPS fights the fertilizers as the form compounds with Ions etc. Further R and D  is needed in this area.


I can picture a high mountain stream where the water can be loaded into the large or many plant plasma generators are running on

wind or solar power (no inverters are required as our Plant Plasma Solution generator runs on DC voltage (also ac Power)



StatCounter - Free Web Tracker and Counter StatCounter - Free Web Tracker and Counter